Exam (elaborations)
Associate CET Study Guide 2024 LATEST EDITION
- Course
- Institution
Associate CET Study Guide 2024 LATEST EDITION
[Show more]
1 review
By: THEALPHANURSE • 2 months ago
Great doc!!
Seller
Follow
MEGAMINDS
Reviews received
Content preview
ASSOCIATE CET STUDY GUIDE 2024 LATESTEDITION
Leakage current in an electronic product, between either of the AC power cord
conductors and the chassis or any exposed metals should not exceed _________.
A. 5 microamps
B. 500 microamps
C. 5 milliamps
D. 50 milliamps - (correct answer) B. 500 microamps
Shaded components on the electronics schematics mean:
B+, or supply voltages in electronics products, is considered to be:
A. +5 to +12 VDC
B. 0 to 30 V DC
C. +12 to 300 V DC
D. The anode or plate voltage supply - (correct answer) D. The anode or plate
voltage supply
A. Only factory service personnel may change the part
B. Only exact replacement parts may be used
C. The shading makes for better readability
D. High voltage is present on these parts - (correct answer) B. Only exact
replacement parts may be used
Ingested solder fumes when particles _______.
A. I'm not harmful to the human body
B. Are toxic
C. From lead-tin solder aren't harmful
D. From tin-alloys are most harmful - (correct answer) B. Are toxic
Second degree skin burns should ________.
A. Not be treated with ice and bandage pack
B. Be covered with thick bandages
C. Be treated with cold water or ice
D. Be treated by draining blisters - (correct answer) A. Not be treated with ice and
bandage pack
Rules describing the fire or toxicity retardant types of cabling which may be installed
in buildings is contained in _________.
,A. NEC Article 770
B. UL 569B
C. TIA/EIA standard 578
D. NEMA code 1316 - (correct answer) A. NEC Article 770
ESD and static discharge is most destructive to _______.
A. CMOS semiconductors
B. TTL semiconductors
C. Germanium PN junctions
D. Silicon PN junctions - (correct answer) A. CMOS semiconductors
If you have never receive formal training and practice CPR want a pricing or dummy, in
the event of finding a fellow worker not breathing, you _________.
A. Should use what knowledge you do half of the procedure and attempt it
B. Should not attempt it, but call for help
C. Should attempt it after calling for help
D. Should, if handy, read the instructions and attempt in order to save the life -
(correct answer) B. Should not attempt it, but call for help
When working at heights above 6 feet, a ________ is required by OSHA rules.
A. Linesman's belt
B. Linesman's belt attached to a lanyard
C. Full body harness attached to a lanyard that prevents more than a 6 foot drop
D. Good insurance policy - (correct answer) C. Full body harness attached to a
lanyard that prevents more than a 6 foot drop
'Phantom' current is associated with ________.
A. Northern Lights
B. Corona arcing from electrical generators
C. Charge retained by inductors
D. Charge retained by capacitors - (correct answer) D. Charge retained by
capacitors
The atomic number of an element is the same as the element's atomic weight.
A. True
B. False - (correct answer) B. False
An increase in the voltage with resistance held constant causes current to __________.
,A. Decrease
B. Increase twice to value of voltage
C. Increase
D. None of the above - (correct answer) C. Increase
The ampere, expresses __________.
A. Volts/sec increase
B. A unit of charge movement per second past a given point
C. Coulombs/charge
D. An increase in resistance - (correct answer) B. A unit of charge movement per
second past a given point
The total resistance of a parallel circuit containing equal branch resistances is found
by the following:
A. By adding all of the branch resistance values
B. By taking the product of all the branch resistance values
C. By dividing the resistance value of a branch by the number of branches
D. The value cannot be found - (correct answer) C. By dividing the resistance value
of a branch by the number of branches
A 12 V DC power supply has a 15 ohm internal resistance. What load resistance can you
be connected to transfer maximum power?
A. 15 ohms
B. 20 ohms
C. 10 ohms
D. 5 ohms - (correct answer) A. 15 ohms
Maximum power transfer occurs when the low impedance is equal to the source
impedance.
A. True
B. False - (correct answer) A. True
What will happen to the current through the resistor if the resistor value increases?
A. Current increases
B. Current remains unchanged
C. Current decreases
D. Car and the voltage across the resistor increases - (correct answer) C. Current
decreases
, Which type of circuit has the same voltage across each component?
A. Parallel
B. Series-parallel
C. Series
D. Combination - (correct answer) A. Parallel
Total power in a series circuit is determined by the:
A. Source voltage times the current
B. Total voltage applied
to the circuit
C. Current flowing through the switch
D. Average wattage rating of each resistor - (correct answer) A. Source voltage
times the current
Which is the equivalent to 100 microamps?
A. .1 milliamps
B. 1 milliamps
C. 10 milliamps
D. 10 Nanoamps - (correct answer) A. .1 milliamps
A resistor __________.
A. Stores an electric charge
B. Is measured in coulombs
C. In a circuit causes a voltage drop from one end to the other
D. Is dependent on lines of force - (correct answer) C. In a circuit causes a voltage
drop from one end to the other
1 kΩ is the same as __________.
A. 1 thousand ohms
B. 1 thousandth of an ohm
C. 10−² ohms
D. 10000 ohms - (correct answer) A. 1 thousand ohms
A circuit has one 500 ohm resistor in series with three 500 ohm resistors that are
connected in parallel with each other. The total resistance would be ____________.
A. 666 ohms
B. 167.7 ohms
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller MEGAMINDS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
76669 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now