AMT 2 study guide exam 2024/2025
Amtrak Conductors and Engineer are classified as class ______ employees -
CORRECT ANSWER-C. [1.103]
Should employees in electrified territory be familiar with the location and operation of
radios and telephones? - CORRECT ANSWER-Yes [1.204]
When using railroad...
Amtrak Conductors and Engineer are classified as class ______ employees -
CORRECT ANSWER-C. [1.103]
Should employees in electrified territory be familiar with the location and operation of
radios and telephones? - CORRECT ANSWER-Yes [1.204]
When using railroad telephone lines or radios, and you hear the word "EMERGENCY"
repeated three times, what must be done? - CORRECT ANSWER-All others using the
phone line or radio channel must yield immediately. [1.205]
All occurrences or conditions which are likely to affect electric Operations must be
reported immediately to whom? - CORRECT ANSWER-The Power Director/Train
Dispatcher. [1.201]
Minimum Approach Distance means? - CORRECT ANSWER-The distance that must be
maintained between personnel and or equipment and all exposed energized lines.
Minimum Approach Distance is measured between the person or the end of a tool,
equipment, or material being used and the exposed energized parts. [1.301]
All overhead wires must be considered energized (Live) at all times except? -
CORRECT ANSWER-When it is known to be de-energized, tested de-energized and
grounded. [1.302]
The third rail must be considered energized (live) at all times except? - CORRECT
ANSWER-When it is known to be de-energized, tested de-energized and a Third Rail
Warning Device is applied. [1.303]
Electric engines and Multiple Units (MU) under overhead wires must be considered
energized (Live) except? - CORRECT ANSWER-When it is known that all Pantographs
are down and Pantograph grounding switches are closed, or overhead wires are de-
energized, tested de-energized and properly grounded. [1.501]
Can employees touch or remove unidentified dangling wires, trees, or foreign objects in
contact with overhead wires or third rail? - CORRECT ANSWER-NO ,employees must
take necessary precautions to protect others and equipment and maintain Minimum
Approach Distance . [1.206]
Conductive material such as steel tape measure, wire, wet or non-rated rope, or linen
tape-line containing metallic reinforcement can be used around energized wire,
apparatus, equipment, or third rail. True or False? - CORRECT ANSWER-False. [1.114]
, The Minimum Approach Distance for AMT-2 Qualified Employees whether or not
protected by Class A employee against Transmission Wires energized or de-energized
and not grounded is? - CORRECT ANSWER-8ft. [Table 1]
What is the Minimum Approach Distance for AMT-2 Qualified Employee whether or not
protected by a Class A employee against the Catenary, Signal Line, and Utility Wires
less than 35000 volts, energized or de-energized and not grounded? - CORRECT
ANSWER-3ft. [Table 1]
What is the Minimum Approach Distance for AMT-2 Qualified Employees against
Transmission Wires for equipment operating in the vicinity of wires energized or de-
energized and not grounded? - CORRECT ANSWER-15ft. [Table 1]
The Minimum Approach Distance for AMT-2 Qualified Employees against Catenary,
Signal Line, Utility Wires Less than 35000 volts for Equipment operating in the vicinity of
wires energized or de-energized and not grounded is/ - CORRECT ANSWER-3ft. [Table
1]
Personnel and Equipment being provided protection by Class A Employee, wires de-
energized, tested de-energized, and grounded will be allowed? - CORRECT ANSWER-
Full Contact. [Table 1]
The Minimum Approach Distance for Unidentified Dangling Wires is? - CORRECT
ANSWER-15ft. [Table 1]
What is the Minimum Approach Distance while walking over and around energized
Third Rail? - CORRECT ANSWER-6 inches. [Table 2]
what is the Minimum Approach Distance for AMT-2 Qualified Employees working with
conductive tools or equipment around Third Rail? - CORRECT ANSWER-4 feet. [Table
2]
The Typical Overhead Wire Profile for the Catenary system starting from The Wire that
contacts the Pantograph are? - CORRECT ANSWER-Contact wire, Auxiliary wire,
Messenger wire, Signal line, Transmission line, Static wire. [Figure 9]
What must be done prior to operating in electrified territory? - CORRECT ANSWER-A
job Briefing. [1.401]
When can Electric Locomotives be routed to tracks protected by a Plate Order? -
CORRECT ANSWER-Ensure that all electric equipment equipped with a Pantograph
(Pantographs) be lowered and locked and/or no third rail shoes are in contact with the
third rail in the area affected by the plate. When the pantograph or third rail shoe cannot
be retracted, the Main Circuit Breaker on the train must be opened and tagged. [2.904
F]
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller TIFFACADEMICS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.49. You're not tied to anything after your purchase.
