ABSA Practice 4A - 2 |100% Corect and Graded A+

ABSA Practice 4A - 2 (4-014-2.2) 1 psi equals: Select one: a. 0.145 kPa b. 6.89 kPa c. 1 kilopascal d. 100 kPa b (4-048-1.5) Gas pockets trapped within a weld are commonly called: Select one: a. Flux b. Porosity c. Spatter d. Slugging b (4-089-2.1) The type of circuit used to store (write) and retrieve (read) information from a computer is known as its: Select one: a. RAM b. ROM c. Motherboard d. Bytes a In a Plant Line Trace sketch: Select one: a. only major features are shown b. pipe sizes are shown c. All process flows are shown d. All valves are shown a One of the key components of a maintenance management system is: Select one: a. Keeping the budget a secret so people don't spend money b. Ensuring the talk button is not held down c. An inventory program d. Emergency shutdowns c In general, all Acts will have the all of the following in common except: Select one: a. There will be a list of penalties, which could be levied for complying with the Act or Regulations b. A listing of the Codes and standards that have been adopted for use c. The responsibility and delegated authority of the Authorized Inspector, as well as the responsibilities of the owner or Chief Engineer of a plant where an inspection is being done, will all be clearly stated