AAFM COURSE 210908-1 BLOCK 1 EXAM 2024 WITH 100% CORRECT ANSWERS
These markings are a visual precursor and are intended to prevent runway incursions. They are optional. - correct answer Enhanced hold position markings
These markings identify the location for aircraft to hold short of an inter...
AAFM COURSE 210908-1 BLOCK 1 EXAM 2024 WITH 100% CORRECT ANSWERS
These markings are a visual precursor and are intended to prevent runway incursions. They are optional.
- correct answer✔✔ Enhanced hold position markings
These markings identify the location for aircraft to hold short of an intersecting taxiway or taxiLane on an apron. - correct answer ✔✔ Intermediate hold positions
By how many inches should you interrupt a taxiway or taxilane centerline when marking intermediate hold positions? - correct answer ✔✔ 6 inches each side
UFC 3-260-01 Table 3-1 - correct answer ✔✔ Runway classification by aircraft type
UFC 3-260-01 Table 3-2 - correct answer ✔✔ Runways
Width of class B runways - correct answer ✔✔ 150ft or 300ft (aircraft dependent)
Paved shoulder width of class B runway - correct answer ✔✔ 25ft for (AF manned aircraft) or 10ft (for trainer, fighter, & B52 aircraft)
Total shoulder width (paved and unpaved) of a class B runway - correct answer ✔✔ 200ft (on both sides of runway)
UFC 3-260-01 Table 3-4 - correct answer ✔✔ Overruns
UFC 3-260-01 Table 3-7 - correct answer ✔✔ Imaginary Surfaces What is the length of a runway overrun? - correct answer ✔✔ 1000ft paved entire length
What is the paved overrun width? - correct answer ✔✔ Same as width of runway; centered on extended runway centerline. (300ft for B52 and 150ft for all other aircraft)
Total width paved and unpaved for B52 runway - correct answer ✔✔ 700ft (550ft for all other aircraft)
What are the dimensions of the primary surface? - correct answer ✔✔ 2000ft wide (centered on runway centerline; 1000ft on each side) and 200ft beyond each end of the runway.
3R's - correct answer ✔✔ Redesign, Regrade, Recess
What surface uses the elevation of the nearest point on the runway centerline? - correct answer ✔✔ Primary surface
What imaginary surface starts at the end of the primary surface? - correct answer ✔✔ ADCS
What surface begins 200ft beyond the end of the runway? - correct answer ✔✔ ADCS
What is the ADCS slope ratio? - correct answer ✔✔ 50:1
What is the starting width of the ADCS? - correct answer ✔✔ 2000ft
What is the slope section ending width minimum for the ADCS? - correct answer ✔✔ 9000ft
What is the starting elevation of the ADCS? - correct answer ✔✔ Nearest runway centerline point; threshold elevation
What is the flat length maximum for the ADCS? - correct answer ✔✔ 25000ft What is the total length maximum (sloped and flat) of the ADCS? - correct answer ✔✔ 50000ft
What is the flat section ending width of the ADCS? - correct answer ✔✔ 16000ft
What is the maximum ending elevation of the ADCS above EAE? - correct answer ✔✔ 500ft
How many feet of paved surface is needed beyond the edge of runway lights? - correct answer ✔✔ 2ft
What is the formula to find the distance of an object from a runway? - correct answer ✔✔ D=HxS
What is the formula to find the height of an object from the runway? - correct answer ✔✔ H=D/S
How do you get the object msl? - correct answer ✔✔ Add the ground elevation to the object agl.
What is the first step of the two step process? - correct answer ✔✔ Determine which surface the object is in.
What is slope of the transitional surface? - correct answer ✔✔ 7:1
What is the maximum height of the transitional surface? - correct answer ✔✔ 150ft above EAE
What surface begins at the end of the primary surface from the runway centerline? - correct answer ✔✔ Transitional surface
What surfaces are defined in part or whole by a radial or arching component? - correct answer ✔✔ IHS, OHS, Conical
What surface borders all other imaginary surfaces? - correct answer ✔✔ Transitional surface
UFC 3-260-01 Table 3-8 - correct answer ✔✔ Imaginary Surfaces Minimum Clearances
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller YANCHY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $16.49. You're not tied to anything after your purchase.
