Exam (elaborations)
MSSC Quality Practices & Measurement Questions and and answers.
- Course
- Institution
MSSC Quality Practices & Measurement Questions and and answers.
[Show more]
Seller
Follow
Hkane
Reviews received
Content preview
MSSC Quality Practices & Measurement__________ can be very effective because it helps you unlock ideas that you would have
never thought of on your own. - correct answer-Brainstorming
__________ error comes from either built-in sources or calibration. - correct
answer-Instrument
__________ inspections assure that the equipment, personnel and processes being used
are providing the desired results and allow problems to be pinpointed and solutions
implemented before the problems can escalate. - correct answer-In-process
__________ is data that can be gathered by answering one true-or-false question. - correct
answer-Attribute data
__________ may provide valuable information concerning a product's quality. - correct
answer-Performing equipment checks during a quality inspection
__________ measures the difference between an object's dimension and an object of known
length. - correct answer-Indirect comparison
10 inches is the same length as __________ mm. - correct answer-254
A __________ avoids the errors of hand-held instruments by locating the parts in the same
place each time a measurement is made. - correct answer-Fixture
A __________ dimension is described in inches per foot. - correct answer-Shaft taper
A __________ has its graduations engraved so that they can not be rubbed off. - correct
answer-Machinist's rule
A __________ is a graphic method to show how the data is distributed across the range of
values. - correct answer-Histogram
A __________ is a measurement tool that measures part dimensions by indicating the
amount of distance its probe moves when placed against the part. - correct answer-Dial
Indicator
A __________ is a plot of the data samples over time (a time-series plot). - correct
answer-Control chart
A __________ is a problem-solving method that organizes ideas generated from
brainstorming in small bite-size pieces which are arranged in a graphic manner. - correct
answer-Fishbone (cause and effect) diagram
,A __________ is a theoretically perfect line, point or plane that is located by a similar feature
of the part. - correct answer-Datum
A __________ is the culmination of events resulting from an unscheduled line stoppage or
quality issue. - correct answer-Corrective Action Report (CAR)
A __________ is the total amount by which a specified dimension is allowed to vary and still
be a good part. - correct answer-Tolerance
A __________ is used to determine which type of defect most frequently occurs. - correct
answer-Pareto chart
A __________ is used to verify that the proper procedures and processes are being adhered
to by plant personnel. - correct answer-Quality audit program
A __________ should always be someone outside the organization. - correct answer-Third
party audit group
A __________ should be done as often as necessary to assure that the processes are
sound. - correct answer-Quality system audit
A __________ shows how one variable of a process varies with another variable. - correct
answer-Scatter diagram
A 100% inspection of a new product revealed that a run of 200 parts resulted in several parts
being rejected. If the rejection rate was 3%. How many bad parts were created? - correct
answer-6
A bell-shaped curve that results from a large group of measurements is the basic concept of
__________. - correct answer-Central tendency
A common decimal inch rule graduation is in __________. - correct answer-50ths
A common fractional inch rule graduation is in __________. - correct answer-32nds
A datum feature symbol can be connected to __________. - correct answer-Any of the
above
A device that is always used as a reference surface is a __________. - correct
answer-Surface plate
A good __________ can both increase value to the customer and reduce product cost. -
correct answer-Quality assurance system
A good example of a(n) __________ is to change the procedures used for machine
maintenance. - correct answer-Permanent corrective action
, A histogram is one type of tool that can be used to __________. - correct answer-Measure
process control
A key concept in continuous improvement is to search for ways to eliminate waste in actions,
time, and __________. - correct answer-Material
A letter with a box around it is a standard notation symbol used to indicate a(n) __________.
- correct answer-Datum feature
A line stoppage causes an immediate response from a number of specialists including a
maintenance person to __________ the cause of the stoppage. - correct answer-Identify and
resolve
A measurement made with a precision measurement tool can be as precise as __________.
- correct answer-0.001 inches
A micrometer increments how far for each complete rotation of its thimble? - correct
answer-0.025
A part measuring 2.54 inches is out of spec if the specification is __________. - correct
answer-2.00 ± .53
A part measuring 44.85 mm in a process with a tolerance of 45mm ± .28 is considered
__________. - correct answer-Out of Spec, above the upper tolerance limit
A problem in a manufacturing process is considered __________ if it could affect product
quality. - correct answer-Critical
A running fit is also called a(n) __________. - correct answer-Sliding fit
A scale typically found on a machinist rule is __________. - correct answer-1/16
A screw with fine thread is represented on a drawing with what designation? - correct
answer-UNF
A sectional view __________. - correct answer-All of the above
A step that is not used by an operator to manually record data for a control chart is
__________. - correct answer-Enable a set
A tape measure is flexible so that __________. - correct answer-It can be easily stored
A typical dial caliper can be used to measure dimensions to the nearest __________ inches.
- correct answer-0.001
A vernier micrometer is __________ as accurate as a caliper. - correct answer-10 times
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Hkane. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
75323 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now