Exam (elaborations)
Gas Technician 2 Exam
- Course
- Institution
Gas Technician 2 Exam
[Show more]
Seller
Follow
lydiaomutho
Content preview
Gas Technician 2 ExamFuses serving motor circuits should be:
a) Quick blow type
b) Time delay type
c) Oversized by 2.5%
d) Oversized by 3.5% - ANS-b) Time delay type.
As the length of on elecincal run increases, it may be necessary to;
a) increase the wire size,
b) Use a dilerent moe o, conducior
c)Decreose the use size
d) increase the fuse size - ANS-a) Increase the wire size
6. Millivolt wiring should be isolated from line voliage wiring because:
a) The line voltage wire will overheat the low voltage wiring.
b) The resistance of the millivolt wiring will be increased.
c)The current in the low voltage wire will be reduced to that of the millivolt wire,
d) The line vollage will induce a volioge into the millivolt wiring - ANS-d) The line vollage
will induce a volioge into the millivolt wiring
7. Which tool is used to determine if the windings on on electric motor have shorted?
a) Voltmeter
b) Ammeter
c) Ohmmeter
d) Wattmeter - ANS-c) Ohmmeter
8. On on electrical schematic diagram, the safety controls are typically drawn;
a) To the right of the loads.
b) Above Ihe loads
c)Below the loads
d) To the left of the loads - ANS-d) To the left of the loads
, 9. Which of the following types of wire must be used in damp locations?
a) NMD
b) NNW
c) LVT
d) BX - ANS-b) NMW
10. On an electrical schematic, all operating controls ore drown:
o) In their energized positions.
b) in their de-energized positions,
c) Normally closed,
d) Normally open. - ANS-d) Normally open
11. An inline ammeter is connected:
a) In series with the device being checked.
b) In porallel with the device being checked.
c) With the system power off
d) Across the load. - ANS-a) In series with the device being checked
12. As the length of a conductor increases, the voltage drop along the conductor:
a) Increases
b) Decreases.
c) Remains the same
d) Should be as flexiole as possible - ANS-a) Increases
13. When a new appliance is to be installed in a typical residential basement and the
supply wiring to it is to be concealed, which of the tollowing types of wire is acceptable,
and most cost effective:
a) NMW
B) NMD
c) BX
d) LVT - ANS-B) NMD
14,When checking a circuit of unknown voltage using an analog meter with 0-30V.
0-125V. 0-250V. and 0-600V, which scale should be selected?
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller lydiaomutho. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
78861 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now