Radiologic Technology QA-QC
A PBL controls this - ANSCollimation
This test will evaluate screen-film contact. - ANSWire mesh test.
As mAs increases, exposure will increase proportionally. This is the meaning of: - ANSExposure
linearity. Advance 2 spaces.
Ensuring that the equipment utilized in clinical practice will perform consistently and function as
intended is - ANSQuality Control.
Ensuring that staff members are educated and experienced in healthcare practice. - ANSQuality
Assurance.
Testing equipment before allowing use in clincal practice. - ANSAcceptance testing.
Earrings on a lateral c-spine is an example of this type of artifact. - ANSExposure artifact.
A pin hole camera is used to evaluate this: - ANSFocal spot size.
Light field alignment is tested with this currency. - ANSPennies.
measured KVP vs control panel KVP should not differ by more than: - ANS10 %.
Half value layers measure: - ANSfiltration.
Scratches or gouges that run parallel to the direction of transport through the processor. -
ANSGuide shoe marks.
Using the IR for multiple exposures before processing. - ANSDouble Exposure.
Worn out foam supports in the cassette cause: - ANSPoor film screen contact.
The first people in the x-ray department to find a QC issue are: - ANSTechnologists.
Certifying equipment to comply with licensure standards is the job of the: - ANSMedical
Physicist
A linear relationship represented on a graph is a _______ line. - ANSStraight.
A PBL controls this - ANSCollimation
This test will evaluate screen-film contact. - ANSWire mesh test.
As mAs increases, exposure will increase proportionally. This is the meaning of: - ANSExposure
linearity. Advance 2 spaces.
Ensuring that the equipment utilized in clinical practice will perform consistently and function as
intended is - ANSQuality Control.
Ensuring that staff members are educated and experienced in healthcare practice. - ANSQuality
Assurance.
Testing equipment before allowing use in clincal practice. - ANSAcceptance testing.
Earrings on a lateral c-spine is an example of this type of artifact. - ANSExposure artifact.
A pin hole camera is used to evaluate this: - ANSFocal spot size.
Light field alignment is tested with this currency. - ANSPennies.
measured KVP vs control panel KVP should not differ by more than: - ANS10 %.
Half value layers measure: - ANSfiltration.
Scratches or gouges that run parallel to the direction of transport through the processor. -
ANSGuide shoe marks.
Using the IR for multiple exposures before processing. - ANSDouble Exposure.
Worn out foam supports in the cassette cause: - ANSPoor film screen contact.
The first people in the x-ray department to find a QC issue are: - ANSTechnologists.
Certifying equipment to comply with licensure standards is the job of the: - ANSMedical
Physicist
A linear relationship represented on a graph is a _______ line. - ANSStraight.
