Exam (elaborations)
NACE CIP LEVEL 2 EXAM NEWEST COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS)
- Course
- Institution
NACE CIP LEVEL 2 EXAM NEWEST COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS)
[Show more]
Content preview
NACE CIP Level 2Terms in this set (311)
WJ-1 (visual cleanliness) is ISO SA 3
comparable to which
abrasive blast cleaning
standard?
*attaches using vacuum, cables or magnets
*Vertical, Horizontal or overhead surface
Robotic water jetting
*Controlled by single operator
includes
*Collects in excess of 95% of the water, removed
coatings and rust (waste generated)
*Nozzle operator
A typical waterjetting team
*Pump Operator
consists of?
*Additional operators or workers as required
Considerations with Back *Causes Fatique
Thrust are: *Should be no more than 1/3 of operators body weight
*work area is properly barricaded
*Electrical equipment protected from water
*Electrical connections are not allowed to sit in water
*All fittings and hoses are in good condition / proper
pressure rating
Safety considerations
*Nozzles are free of obstructions
before waterjetting are
*System is flushed clean and air removed
*The dump system and all control systems are
operational
*Proper LockOut/ TagOut provisions in place
*Confined entry requirements addressed
, *Worker Safety
*Worker air quality
Waterjetting advantages *Less stringent respiratory requirements
include? *No dust or contamination or clean up
*Environmentally friendly
*Requires less cleanup
*Waterjetting does not leave a surface profile
*Equipment is very expensive
*Danger of Ultra High Pressure hose breaking
Waterjetting disadvantages
*Danger of injection into the skin or serious cuts
include:
*Collecting and disposing of the contaminated
Water
*Proficient operators needed
Cause of Blistering on Oil, moisture and / or grease
coatings?
Saturation point drops as? Air is compressed, making air wetter
Check compressor for Moisture traps, inter cooler and aftercooler
water contamination at?
Common Hot Dipped (HD) Cracking, peeling, bare spots, lumps, Blisters, flux
inspection defects inclusions, ash inclusions and dross inclusions
*Destructive test instrument
*Used on non-magnetic or nonferrous
Substrate
Describe what a Tooke
*has illuminated 50x microscope
Gage is and some models
*good from 0-100 mils
*Groove cut through coating
*Models are Mark II and Mark III
Centrifugal blast machine *Abrasive starved wheel or
showing low amperage *Flooded or choked wheel
could indicate?
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller MEGAMINDS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $15.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
79650 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now
