Exam (elaborations)
IMSE 250 - Exam 2 (1)
- Course
- Institution
IMSE 250 - Exam 2 (1)
[Show more]
Seller
Follow
lydiaomutho
Content preview
IMSE 250 - Exam 2Calcium - ANS-Which one of the following is NOT an element commonly found in plastics
5 PP - ANS-If you box some leftover dinner for lunch at school and want to reheat in a
microwave, a plastic container with which recycling code is best to use?
ABS - ANS-What type of plastic is Legos made out of?
PLA - ANS-Which type of plastic is not derived from petroleum?
Thermosets - ANS-Which plastic materials are stronger and more rigid than others?
Thermoplastics - ANS-Which plastic materials are easier to recycle and use?
some thermoplastics and some thermosets - ANS-Plastic casting processes can be used to
produce parts from?
True - ANS-Plastic cups are made from thermoplastics
pellets - ANS-To make those plastic ware, at the very beginning, the resin is usually in the form
of?
UV-Lamps - ANS-How does the production line dry the ink printed on cups?
Milling - ANS-Which one of the following is not considered as a single-point machining process?
3-D - ANS-Most cutting processes are?
False - ANS-Drilling operation can only be conducted on a drill press.
Power consumption increases - ANS-When the cutting fluid is applied into cutting zone, many
things will happen. Which will NOT happen?
The rake angle is always positive - ANS-Which one of the following is not one of the
assumptions of this cutting model?
The picture, in the middle is a steel turning side view; please tell which side is generated closely
along the rake face on the cutting tool? (rough on top, smooth on bottom) - ANS-Lower
rake - ANS-Generally speaking, the larger the ____ angle, the sharper the cutting tool.
, 1decreases - ANS-1A shear angle(Φ) increases, the chip thickness ______
high - ANS-The shear angle is of fundamental importance. For any give uncut chip thickness, a
small shear angle means a ____ cutting force.
1increase - ANS-1When the depth of cut increases, the cutting force will typcially _____
Productivity - ANS-What is the main driving force to the development of new cutting too
materials?
2increase - ANS-Generally speaking, a decrease in cutting speed will ____ the tool life.
Turning, Facing, and Drilling - ANS-A turning machine (lathe) is a very versatile tool, what are
three operations that can be done on a lathe?
Yes - ANS-Does a larger diameter have a higher cutting speed?
Rotating Working, Linear Tool Feed, and Tool Tip Radius - ANS-A surface profile with grooves is
generated by a lathe. Can you explain why there are equally spaced groves?
Higher Speed, Lower Feedrate, larger radius - ANS-A surface profile with grooves is generated
by a lathe. How would you recommend some adjustments to improve the surface finish?
Edge, Flank, Crater, Chipping - ANS-Name some different cutting tool wear and failure modes.
larger - ANS-In a turning operation, if the tool tip is set higher than the rotation axis of the
workpiece, the effective rake angle will be _____ than that when the tool tip is set at the same
height as the rotation axis of workpiece.
smaller - ANS-In a turning operation, if the tool tip is set higher than the rotation axis of the
workpiece, the effective clearance angle will be _____ than that when the tool tip is set at the
same height as the rotation axis of workpiece.
the screw action of the helical flutes - ANS-In drilling with a conventional drill, what action is
helping remove the cutting chips from the machined hole?
lower - ANS-In a drilling operation with a standard twist drill, the cutting speed is different along
the cutting lips and the chisel edge. Usually, the speed at the drill center is _____ than that at
the outer diameter of the drill.
Centering, Countersinking, Drilling, Boring, Reaming - ANS-What are the typical processes to
machining an accurate hole.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller lydiaomutho. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
75632 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now