Network Pro Ch 4 all exams with Questions and Answers
2 views 0 purchase
Course
Network Pro
Institution
Network Pro
Network Pro Ch 4 all exams with
Questions and Answers
The media access control method of all Ethernet networks is - CORRECT ANSWER
CSMA/CD
A network is connected following the IEEE 802.3 specifications. Which of the following
best describes when a device can transmit messages? - C...
Network Pro Ch 4 all exams with
Questions and Answers
The media access control method of all Ethernet networks is - CORRECT ANSWER-
CSMA/CD
A network is connected following the IEEE 802.3 specifications. Which of the following
best describes when a device can transmit messages? - CORRECT ANSWER-The
device listens to determine if the transmission media is free.
Which of the following use the CSMA/CD access method?(2 answers) - CORRECT
ANSWER-10BaseT
1000BaseT
Which of the following physical topologies are used with Ethernet networks?(2 answers)
- CORRECT ANSWER-Star
Bus
Ethernet 100BaseFX networks use what type of cabling? - CORRECT ANSWER-Fiber-
optic
Which of the following Ethernet standards uses fiber optic cabling?(2 answers) -
CORRECT ANSWER-100BaseFX
1000BaseLX
Your network follows the 100BaseTx specifications for Fast Ethernet. What is the
maximum cable segment length allowed? - CORRECT ANSWER-100 meters
With an Ethernet 10BaseT network, the maximum cable length between a computer
and the hub is: - CORRECT ANSWER-100 meters
You have been tasked with designing an Ethernet network. Your client needs to
implement a very high-speed network backbone between campus buildings; some of
which are around 300 m apart. Fiber-optic cabling has already been installed between
buildings. Your client has asked that you use the existing cabling that operates at full-
duplex. Which Ethernet standard meets these guidelines?(2 answers) - CORRECT
ANSWER-10GBaseSR
1000BaseSX
What type of cabling is used with 100BaseTX Fast Ethernet networks? - CORRECT
ANSWER-Type 1A STP or Category 5 UTP
, What topology is used with 100BaseTX Fast Ethernet networks?(2 answers) -
CORRECT ANSWER-Physical star/logical bus
Physical star/logical star
Which of the following are requirements of the 1000BaseT Ethernet standards?(3
answers) - CORRECT ANSWER-RJ-45 connectors
The cable length must be less than or equal to 100m
CAT 5e cabling
You are planning a network for an educational campus. Due to the size of the buildings
and the distance between them, you have elected to use 10BaseFL hubs, cabling, and
network interface cards. What is the maximum length for the network cable between a
workstation and a hub? - CORRECT ANSWER-2000 meters
Which Gigabit Ethernet standard uses multimode fiber-optic cabling and supports
network segments up to a maximum of 550 m long? - CORRECT ANSWER-
1000BaseSX
You have been tasked with designing a high-speed Ethernet network. Your client's
building already has 150 ohm shielded twisted pair wiring installed. Due to budget
constraints, they have asked you to reuse the existing wiring instead of installing new
fiber optic cabling. Which Ethernet standard could you implement in this situation? -
CORRECT ANSWER-1000BaseCX
You would like to implement 10 Gbps Ethernet over a distance of 1 km or greater.
Which of the following would be the minimum requirement for the implementation?(2
answers) - CORRECT ANSWER-10GBaseLR standards
Single mode fiber
Which of the following standards is used by SONET? - CORRECT ANSWER-
10GBaseLW
You want to implement an Ethernet network at very long distances using fiber optic
cables. Which standard and cable type would you choose?(2 answers) - CORRECT
ANSWER-Single Mode Fiber
1000BaseLX
You need to transfer data from one laptop to another and would like to use an Ethernet
cable. You do not have a hub or a switch.
Which type of cable should you use? - CORRECT ANSWER-Crossover
You want to connect the LAN port on a router to the uplink port on a switch. The switch
does not support auto-MDI.
Which type of cable should you use? - CORRECT ANSWER-Crossover
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller TIFFACADEMICS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.99. You're not tied to anything after your purchase.
