Test out Network Pro Exam Q&A Latest
Updated
You manage a network with a single switch. On each switch port, a hub connects
multiple devices to the switch.
which condition are you most likely to experience on the network ? - C0RRECT
ANSWER-collisions
select the statement that ...
Test out Network Pro Exam Q&A Latest
Updated
You manage a network with a single switch. On each switch port, a hub connects
multiple devices to the switch.
which condition are you most likely to experience on the network ? - C0RRECT
ANSWER-collisions
select the statement that best describes a broadcast storm. - C0RRECT ANSWER-A
Broadcast storm occurs when there are so many broadcast messages on the network
that they approach or exceed the network bandwidth..
Which of the following solutions would you implement to eliminate switching loops? -
C0RRECT ANSWER-spanning tree
You manage a network that uses a single switch. All ports within your buildings connect
through he single switch . Which feature should you implement? - C0RRECT ANSWER-
VLANs
You manage a network that uses multiple switches. You want to provide multiple paths
between switches so that if one link goes down, an alternate path is available.
Which feature should your switch support? - C0RRECT ANSWER-spanning tree
You run a small network for your business that has a single router connected to the
internet and a single switch. You keep sensitive doc.
What should you use for this situation? - C0RRECT ANSWER-VLAN
You manage a single subnet with three switches. The switches are connected to
provide redundant paths between the switches.
Which feature prevents switching loops and ensures there is only a single active patch
between any two switches? - C0RRECT ANSWER-Spanning tree
Which feature prevents switching loops and ensures there is only a single active path
between any two switches? - C0RRECT ANSWER-spanning trees
A user reports that network access from her workstation is very slow. The problem does
not seem to be affecting any other users.
Which of the following conditions is the most likely cause? - C0RRECT ANSWER-
Duplex mismatch
You manage a local area network with several switches. A new employee has started
today so you connect her workstation to a switch port.
,Which of the following is the most likely cause of the problem? - C0RRECT ANSWER-
Incorrect VLAN assignment
You manage a network with multiple switches. You find that your switches are
experiencing heavy broadcast storms.
Which of the following will help reduce the effects of a broadcast storm? - C0RRECT
ANSWER-Enable spanning tree on the switches
Which of the following solutions would you implement to eliminate switching loops? -
C0RRECT ANSWER-spanning tree
While viewing the status of the interfaces on a Cisco switch, you see abnormally large
of oversized ethernet frames being received on one interface. This interface is
connected to a workstation located on the 2nd floor.
What could be causing this to happen? - C0RRECT ANSWER-The workstation's
network board is jabbering
The network board in a workstation is currently configured as follows: - C0RRECT
ANSWER-show running-config interface
show interface
You manage a single subnet with three switches. The switches are connected to
provide redundant paths between the switches.
Which feature allows the switches to pass VLAN traffic between the switches? -
C0RRECT ANSWER-Trunking
You manage a network with two switches. The switches are connected together through
their Gigabit Ethernet uplink ports.
You define VLAN 1 and VLAN 2 on each switch. A device on the first switch in VLAN 1
needs to communicate with a device on the second switch also in VLAN 1.
What should you configure to allow communication between these two devices through
the switches? - C0RRECT ANSWER-Trunking
When configuring VLANs on a switch, what type of switch ports are members of all
VLANs defined on the switch? - C0RRECT ANSWER-Trunk Ports
Computers A and B are on the same VLAN and are separated by two switches, as
shown in the exhibit. Computer A sends a Fram to Computer B.
Which of the following best describes the composition of the frame as it travels from A
to B? - C0RRECT ANSWER-Computer A sends a normal frame. The first switch
appends a VLAN ID to the frame. The second switch removes the VLAN ID before
forwarding it to Computer B.
, Which of the following statements accurately describes a VLAN ID? - C0RRECT
ANSWER-Switches append a VLAN ID to the header of each frame to identify the
virtual network to which it belongs.
CSMA/CD - C0RRECT ANSWER-The media access control method of all Ethernet
networks is ___________________.
The device listens to determine if the transmission media is free. - C0RRECT
ANSWER-A network is connected following the IEEE 802.3 specifications. Which of the
following best describes when a device can transmit messages?
10BaseT & 1000BaseT - C0RRECT ANSWER-Which of the following use the
CSMA/CD access method? Select all that apply.
Bus and Star - C0RRECT ANSWER-Which of the following physical topologies are
used with Ethernet networks? (Select two.)
Fiber optic - C0RRECT ANSWER-Ethernet 100BaseFX networks use what type of
cabling?
100BaseFX & 1000BaseLX - C0RRECT ANSWER-Which of the following Ethernet
standards uses fiber optic cabling? (Select two.)
100 meters - C0RRECT ANSWER-Your network follows the 100BaseTx specifications
for Fast Ethernet. What is the maximum cable segment length allowed?
100 meters - C0RRECT ANSWER-With an Ethernet 10BaseT network, the maximum
cable length between a computer and the hub is __________.
10BaseSR &1000BaseSX - C0RRECT ANSWER-You have been tasked with designing
an Ethernet network. Your client needs to implement a very high-speed network
backbone between campus buildings; some of which are around 300 meters apart.
Multimode fiber-optic cabling has already been installed between buildings. Your client
has asked that you use the existing cabling.
Which Ethernet standard meets these guidelines? (Choose two.)
Type 1A STP or Category 5 UTP - C0RRECT ANSWER-What type of cabling is used
with 100BaseTX Fast Ethernet networks?
Physical star/logical bus & Physical star/logical star - C0RRECT ANSWER-What
topology is used with 100BaseTX Fast Ethernet networks? (Select two.)
CAT 5 cabling & RJ-45 connectors & The cable length must be less than or equal to
100m - C0RRECT ANSWER-Which of the following are requirements of the 1000BaseT
Ethernet standards? (Select three.)
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller TIFFACADEMICS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $16.49. You're not tied to anything after your purchase.
