What safety protection is needed when using drills or drivers? - Safety goggles / ear
protection
A drill chuck typically has how many jaws? - Three
Which tool is best for driving screws into wood? - Driver
How can you prevent boring holes into our tables? - Use sacrificial wood
How can you prevent splitting your material when driving a screw? - Pilot hole
What is a simple way to gauge the depth of your hole when drilling? - Measure from the
tip of drill and use tape to wrap around drill bit to mark it
A ______________ wrench is used to adjust the length of the piloting bit, when using a
countersink bit. - Allen
What is the most common way that students break our precious drill bits? - Not having
good contact between bit and hardware
What features of the jigsaw make it better for cutting large shapes, or large panels of
wood? - The long skinny saw bit makes it easy to maneuver
What is the difference between coarse-tooth and fine-tooth blades? - Coarse tooth has
fewer and larger teeth for bigger projects while Fine tooth has many smaller teeth for
more intricate work
Which blade is best choice for cutting a 2.5 inch diameter circle out of ¼" plywood. -
Fine Tooth
Can a jigsaw be used to pierce shapes out of planar wood? And what tool is necessary
first to do so? - Yes, Fine Tooth
Should the blade be touching the edge of the material before you start up the saw? -
No, start the saw before making contact with the material
How many clamps are best for holding your workpiece? - Two
Where should your non-trigger hand be placed? - On front hand grip and away from
blade
, Before touching or changing blades you should first make sure of these two things? -
The saw is unplugged and off / The blade is hot so use caution
Why use a drill press over a hand drill? - 90 degrees to work surface, don't have to push
as hard into your piece
What are the most commonly used bits for drill press? - Flute, Forstner, Spade
What tool is used to tighten a bit into the chuck? - Chuck Key
T/F The table should always be unlocked before beginning to drill into your material. -
False
Why would you ever want to raise or lower the table? - Closer or farther from the bit
depending on the length
Do you need to put the drill press into reverse to pull out? - No, there is not reverse
What is the machinist vise used for? - Drill in small piece of wood
What is a safe way to drill into a dowel rod? - Use a V block
What type of blade does the panel saw have? - Circular
What is the saw mounted onto? - Carriage
What is the name of the type of cut that is vertical? - Cross cut
T/F It is important that the carriage is locked onto the rails when making a horizontal rip
cut. - True
Where should your hand never go when pushing your stock? - Behind Carriage
How many red rollers should your wood be on? - Three
What is Bailey's TV name? - Bailey Builder
Do you have to turn the saw on before it comes in contact with the wood? - Yes
Why isn't the panel saw a good tool for cutting a circle shape in half? - It could move
during the cut and is only on 2 panels
Why is this saw called a "compound" saw? - Versatile tool used for making cross cuts
and can do it all at the same time
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller VasilyKichigin. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.48. You're not tied to anything after your purchase.