100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
ELEVATOR MECHANIC EXAM 2024 REAL 180 ACTUAL QUESTIONS WITH 100% CORRECT ANSWERS UPDATED 2024 GUARANTEE A+ JUST RELEASED $26.99   Add to cart

Exam (elaborations)

ELEVATOR MECHANIC EXAM 2024 REAL 180 ACTUAL QUESTIONS WITH 100% CORRECT ANSWERS UPDATED 2024 GUARANTEE A+ JUST RELEASED

 3 views  0 purchase
  • Course
  • Elevator mechanic
  • Institution
  • Elevator Mechanic

ELEVATOR MECHANIC EXAM 2024 REAL 180 ACTUAL QUESTIONS WITH 100% CORRECT ANSWERS UPDATED 2024 GUARANTEE A+ JUST RELEASED

Preview 4 out of 58  pages

  • August 5, 2024
  • 58
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • Elevator mechanic
  • Elevator mechanic
avatar-seller
keithdaniel
1|Page


ELEVATOR MECHANIC EXAM 2024 REAL 180 ACTUAL
QUESTIONS WITH 100% CORRECT ANSWERS UPDATED
2024 GUARANTEE A+ JUST RELEASED




A Latching relay: Used for call registration,direction
selection or as selector relays
Two types are: Set/Rest are electrical and Mechanical
Latching relays
Need to know latching relay symbol, Its a box with shaded
triangle in lower right hand corner. - CORRECT ANSWER
>>>>Which relay do you need to Order

710 Pg, 7

RPM = 60 ∙ ƒ ÷ P÷2 =
Step 1. 60 x Frequency (Hz.) =
Step 2. Poles ÷ 2 =

,2|Page


Take answer 1 and ÷ by answer 2 = - CORRECT ANSWER
>>>>Know the formula for RPM

435 Pg. 5

If you are referring to a megohm meter, it is a test of the
insulation properties of such things as electric wiring, motor
windings and high power antenna mounts.

We use a "megger" or "meg out" electrical wiring and
equipment to see if it is shorted to ground or the frame in
any way.

The megger uses much higher voltages to check resistance
than a normal Volt-ohm meter.

Minimum resistance is 1 Meg Ohm - CORRECT ANSWER
>>>>Know what a Megger is and what it does

636 Pg. 13

(1) A parallel connection. (2) A resistive element placed
across the terminals of an armature to bypass a portion of
the current. (3) A flexible electrical conductor designed to
conduct current around the mechanical joint between two
conductors. (4) The resistive element (Usually of very low
resistance) used in parallel with a DC ammeter movement

,3|Page


to bypass a calibrated portion of the total circuit current. -
CORRECT ANSWER >>>>Shunt Overloads

425 All Pages

Bad Ground - CORRECT ANSWER >>>>You are using a Temp
Run Box and you get shocked! Why!

520 Pg. 4

The bridle hitch can consist of two,three, or four single
hitches (fig. 3-22), used together to form a bridle hitch for
hoisting an object
A sling with two legs used to lift a 1,000 pound object will
have 500 pounds of the load on each leg when the sling
angle is 90 degrees. The load stress on each leg increases as
the angle decreases; and if the sling angle was 30 degrees
lifting the same 1,000 pound object, the load will be 1,000
pounds on each leg. Try to keep all sling angles greater than
45 degrees; sling angles approaching 30 degrees are
considered extremely hazardous and must be avoided at all
cost. - CORRECT ANSWER >>>>Bridal Hitch

128 Pg 17

Scaffolding should be tied to the structure using
#9 wire or tie-in devices. The first vertical tie

, 4|Page


should be at the maximum height of 4 times the
narrowest base dimension. Additional ties are not
to exceed 26' vertically. Maximum horizontal
distance between ties is not to exceed 30'. - CORRECT
ANSWER >>>>Scaffolding, You have 32' of rise, you are using
3x5 scaffolding. Where will the tie off points be ?

140 PG. 287-288

Counterweights (Typically) are hung to counter balance the
weight of the car PLUS 40% of Capacity Load. - CORRECT
ANSWER >>>>How much should Counterweight way?

240 Pg. 14

Note: We do not use wire smaller than #20 in travelling
cables and #24 outside travelers.
Largest wires are feeders to Hoist /Pump motor
We always have 10 % spares
10% of 52 = 5.2
On a calculator Multiply the percent 10 by the number you
have and ÷ by 100
10 X 52 ÷ 100 = 5.2 - CORRECT ANSWER >>>>Pulling Spare
Wires (Example) 10% of 52 Wires

515 Pg.26

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller keithdaniel. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $26.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

78140 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$26.99
  • (0)
  Add to cart