1. the purpose of an in-line fuse on the protect the circuit from a direct short or
positive lead of a DC circuit is: overload
2. what is the safest method of re- use a solder wick
moving solder from a printed circuit
board?
3. if batteries in a DC circuit are in- higher voltage and no charge in cur-
stalled in a series aiding configura- rent
tion, the resulting values will be:
4. a DC power source rater 150W @ 5V 30 A
will handle a current demand of:
5. red, orange, red, silver 2,300 (2.3k) +/- 10%
6. what happens when one resistor in the current is zero through all resistors
a series string of resistors becomes
open?
7. ground is defined as: a reference point for measurement
8. an anti-static wrist strap should be integrated circuits
used in the handling of:
9. during soldering, what should be tin the strands
done to prevent the bare ends of
stranded wire from fraying?
10. when a technician is taking test maximum scale
measurements of an unknown volt-
age value, the scale should be use
first in the:
11. while working with high voltage cir- be sure they do not provide a path to
cuitry technicians should always: ground through their body
12. how much power does a 59K ohm 169mW
resistor that has 100V measure
across it dissipate?
1/6
, ISCET certification
13. two 15 VDC power supplies can pro- 30 VDC
duce what voltage when they are
connected in series aiding?
14. r1 8 ohms, r2 4 ohms, are in series. 12 ohms
what is the total resistance?
15. a battery is an example of energy chemical action
generation by:
16. a meter reading 0 ohms across the good fuse
fuse would indicate:
17. the most correct way to write 14000 1.5uV
micro volts would be:
18. what piece of equipment should isolation transformer
be used to prevent electrical shock
while a chassis is being:
19. what type is resistor is used for wire bound
high current applications?
20. atoms missing an electron are positive ions
called:
21. what should never be used on elec- acid flux
tronic assemblies?
22. if 1.5 mA of current is flowing 4.5 V
through a 3K ohm resistor, what is
V?
23. resistors have a rating in OHMS wattage
and:
24. when using a multimeter, power ohms
must be off to measure
2/6
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Aplusplus. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.