FAE (Fire Apparatus Engineer) Illinois Questions And Answers Graded A+
14 views 0 purchase
Course
FAE Illinois
Institution
FAE Illinois
Used primarily on portable pumps where the velocity of exhaust gases passing through a venturi creates
a vacuum. Require High engine RPM and is not very efficient. - Exhaust Primers
The network of pipes of intermediate size which reinforce the grid within the various loops of the
primary feeder ...
FAE (Fire Apparatus Engineer) Illinois
Used primarily on portable pumps where the velocity of exhaust gases passing through a venturi creates
a vacuum. Require High engine RPM and is not very efficient. - Exhaust Primers
The network of pipes of intermediate size which reinforce the grid within the various loops of the
primary feeder system and aid the concentration of the required fire flow at any point. -
Secondary Feeders
What are all the steps in a Service Test? - 1. 20 minutes: 100% @ 150 psi
2. 10 minutes: 70 % @ 200 psi
3. 10 minutes: 50% @ 250 psi
Optional: 100% @ 165 psi (overload or spurt test)
What does One cubic foot of water contain in inches? - 1.728 cubic inches
What does One cubic foot of water contain in gallons? - 7.5 gallons
What does One gallon of water weigh? - 8.35 lbs
What does One gallon of water contain in inches? - 231 cubic inches
How high will One psi elevate water? - 2.304 feet
What is atmospheric pressure at sea level? - 14.7 psi
What is the maximum lift for drafting? (Theoretically) - 34 feet
How high does One inch (1") mercury (inches in vacuum) lift? - 1.13 feet of lift
, What is the recommended minimum psi that should be maintained on the compound gauge when taking
water from a hydrant? - 10 psi
What is Static pressure? - Stored or potential energy that is available to force water through pipes
and fittings, fire hose, and adapters.
What are all the steps in Certification Test (pre-service tests)? - 1. 2 Hour: 100% @ 150 psi
What does one cubic foot of water weigh? - 62.5 lbs
What is a Spurt or Overload test? - 100% @ 165 psi (done in certification test for 10 minutes)
What are Pump Tests? - 100% capacity @ 150 psi net pump pressure
70% capacity @ 200 psi net pump pressure
50% capacity @ 250 psi net pump pressure
What is Net Engine/Pump Pressure (NEP)? - Net Pump Pressure (NEP) is the measurement of the
total work performed by the pump:
a. To lift water into the pump (drafting)
b. To discharge water from the pump
NEP= Suction Side Work(drafting) + Discharge Side Work
How do you figure out Suction Side Work ? - Suction Side Work(psi)= Lift (ft)+Intake Hose
FL(Friction Loss) (psi) Divided by 2.3
What is Fog nozzle pressure for Hand held nozzle and Master Stream? - 100 psi
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller PatrickKaylian. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.
