Woodshop Safety Exam Guide Questions and CORRECT Answers
9 views 0 purchase
Course
Woodshop
Institution
Woodshop
Woodshop Safety Exam Guide Questions
and CORRECT Answers
Name the machine used to cut lumber parallel to the grain - Correct Answer- Table saw
Where should the saw be before starting a cut on the radial arm saw? - Correct AnswerBehind the fence
Where should your hands be and what should they ...
Woodshop Safety Exam Guide Questions
and CORRECT Answers
Name the machine used to cut lumber parallel to the grain - Correct Answer- Table saw
Where should the saw be before starting a cut on the radial arm saw? - Correct Answer-
Behind the fence
Where should your hands be and what should they be doing while making a crosscut on the
radial arm saw? - Correct Answer- Your hands should never be in the path of the blade, while
making a cut your left hand should hold the stock firmly against the fence at least 6 inches
from the blade. Your right hand will pull the motor and blade firmly across the stock.
How far should the blade protrude above the lumber when using the table saw? why? -
Correct Answer- The blade should protrude 1/4 inch above the stock. This will minimize the
risk of injury.
When and why is a push stick used in this shop? - Correct Answer- A push stick is used while
operating the table saw if the distance between the fence and the blade is less than 6 inches. It
is also used on the jointer if jointing an edge if the stock is lower than the fence. This keeps
the hands a safe distance from the blade and greatly reduces the possibility of injury.
Explain what "Margin of safety" means. state the margin of safety for the radial arm saw, the
jointer, the table saw, the band saw, the scroll saw and the miter saw? - Correct Answer-
Margin of safety is the closest that the operators fingers should be to the blade at any given
time. The margin of safety for the radial arm saw is 6" Jointer 5" Table saw5" Bandsaw 2"
Scroll saw 2" Miter saw 4"
In what order do you sate the dimension of a piece of stock and tell what machines you would
use to cut these various parts of a board? - Correct Answer- The correct order is thickness,
width, and lengh using the planer for the thickness then jointing one edge on the jointer
cutting board width on the table saw and then to length on the radial arm saw.
Name the machines used to cross cut the grain of lumber and the machine used to cut along
the grain of lumber in the shop? - Correct Answer- The machines for crosscutting are the
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller MGRADES. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.
