100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
ASE AUTOMATIC TRANSMISSIONS STUDY SET QUESTIONS AND ANSWERS WITH SOLUTIONS 2024 $16.49   Add to cart

Exam (elaborations)

ASE AUTOMATIC TRANSMISSIONS STUDY SET QUESTIONS AND ANSWERS WITH SOLUTIONS 2024

 4 views  0 purchase
  • Course
  • ASE
  • Institution
  • ASE

ASE AUTOMATIC TRANSMISSIONS STUDY SET QUESTIONS AND ANSWERS WITH SOLUTIONS 2024

Preview 2 out of 13  pages

  • August 15, 2024
  • 13
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • ASE
  • ASE
avatar-seller
Performance
ASE AUTOMATIC TRANSMISSIONS
STUDY SET QUESTIONS AND ANSWERS
WITH SOLUTIONS 2024
After a long drive red fluid is seen on the transmission case and under the chassis of a vehicle. Technician
A says this can be caused by fluid aeration. Technician B says this could be caused by engine overheating.
Who is correct?



A. Technician A

B. Technician B

C. Both A and B

D. Neither A or B - ANSWER C. Both A and B



The MIL is illuminated and the transmission only operates in third and reverse gears. Which of the
following is the MOST likely cause of this condition?



A. Adaptive learning.

B. High line pressure.

C. Low line pressure.

D. Limp-in mode. - ANSWER D. Limp-in mode.



Which of the following affects a transmission's shift points in relation to vehicle speed?



A. The throttle valve.

B. The governor.

C. Both of these.

D. Neither of these. - ANSWER B. The governor



While testing the TCM of an electronic automatic transmission the technician should use at least a:

, A. 1 Megohm tester.

B. 5 Megohm tester.

C. 10 Megohm tester.

D. 20 Megohm tester. - ANSWER C. 10 Megohm tester.



An automatic transaxle slips only while turning corners. Which of the following has caused this
condition?



A. Worn Band

B. Torque Converter Clutch

C. Low Fluid Level

D. Planetary Gearset - ANSWER C. Low Fluid Level



Refer to the chart above. Which gear ratio best represents overdrive?



A. 4.027:1

B. 0.852:1

C. 3.064:1

D. None of these. - ANSWER Answer B is correct. This ratio (0.852:1) represents overdrive



A final drive assembly has been replaced. Technician A says to use an inch pound torque wrench to check
for proper pinion preload. Technician B says to use a dial indicator to check the ring gear's backlash. Who
is correct?



A. Technician A

B. Technician B

C. Both A and B

D. Neither A or B - ANSWER C. Both A and B

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Performance. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $16.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

80461 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$16.49
  • (0)
  Add to cart