100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
CSLB B LICENSE GENERAL CONTRACTOR 2024 ACTUAL EXAM COMPLETE 300+ QUESTIONS WITH DETAILED VERIFIED ANSWERS (100% CORRECT ANSWERS) / ALREADY GRADED A+ $17.89   Add to cart

Exam (elaborations)

CSLB B LICENSE GENERAL CONTRACTOR 2024 ACTUAL EXAM COMPLETE 300+ QUESTIONS WITH DETAILED VERIFIED ANSWERS (100% CORRECT ANSWERS) / ALREADY GRADED A+

 8 views  0 purchase
  • Course
  • CSLB B LICENSE GENERAL CONTRACTOR
  • Institution
  • CSLB B LICENSE GENERAL CONTRACTOR

CSLB B LICENSE GENERAL CONTRACTOR 2024 ACTUAL EXAM COMPLETE 300+ QUESTIONS WITH DETAILED VERIFIED ANSWERS (100% CORRECT ANSWERS) / ALREADY GRADED A+

Preview 4 out of 31  pages

  • August 15, 2024
  • 31
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • CSLB B LICENSE GENERAL CONTRACTOR
  • CSLB B LICENSE GENERAL CONTRACTOR
avatar-seller
Americannursingaassociation
CSLB B LICENSE GENERAL CONTRACTOR 2024
ACTUAL EXAM COMPLETE 300+ QUESTIONS WITH
DETAILED VERIFIED ANSWERS (100% CORRECT
ANSWERS) / ALREADY GRADED A+


If unused mortar stiffens due to hydration of cement, what must you do? -
ANSWERDiscard the mortar

What minimum time must you wait before caulking or grouting new tiles? - ANSWER24-
48 Hours

How long should you wait before installing tile on a shower pan? - ANSWER24 Hours

Unstable dry rock, angular gravel, sandy loam, and cohesive soils having compressive
strengths greater than 0.5 and less than 1.5 tons/sq ft (tsf), are typical examples of: -
ANSWERType-B Soils

If 65 street lights are fed by a 2275 volt series circuit, what is the voltage across each
light? - ANSWER35V

In a series circuit, the total voltage is divided equally.

For safety reasons, the maximum simple slope of an excavation, up to 20 ft deep, in
Type-B soil is: - ANSWER1:1 (45°)

A Pittsburgh joint is used in: - ANSWERHVAC ductwork

The drain for a pressure relief valve on a water heater should be extended to: -
ANSWERThe outside of the building

What is the minimum slope toward the drain of a shower pan? - ANSWER1/4" per foot
(2%)

What is the diameter of #3 rebar? - ANSWER3/8"

If a vendor fails to provide an MSDS, you have the right to call: - ANSWERCal/OSHA or
DOSH

When installing a door jamb, you need shims at: - ANSWERBoth hinge and strike sides,
three on each side.

,Which of the following is used to adhere vinyl floors?

A. Epoxy cement
B. Asphalt mastic
C. Latex primer
D. White glue - ANSWEREpoxy cement

When do you need bracing for a drywall wall? - ANSWERDiagonal bracing is needed
every 25' for any drywall wall.

How should you clear the roots from a construction site? - ANSWERClear roots to 12"
below grade.

Dividing watts by amps gives you: - ANSWERVolts

The most frequent on-the-job roofing accidents are: - ANSWERFalls

Which of the following is NOT a type of wood block flooring?

A. Parquet
B. Wood Mosaic
C. Wood Tile
D. All of the above. - ANSWERWood tile

Lightweight concrete is best used for:

A. Curb and Gutter
B. Second floor decking
C. First floor slab on grade
D. Footings - ANSWERSecond floor decking

The tool used to carry grout needed to patch a small hole is a:

A. Hawk
B. Poling board
C. Spot board
D. Mason's scutch - ANSWERSpot Board

Which pipe is NOT appropriate for industrial wastes?

A. Cast iron
B. Schedule 40 ABS DWV
C. Extra strength vitrified clay
D. Copper - ANSWERCopper

Where do you need a fire wall?

,A. Between a living room and a bedroom
B. Between a bedroom and a bathroom
C. Between a kitchen and a bath
D. A separation wall between a dwelling and an attachment - ANSWERA separation
wall between a dwelling and an attachment.

What is the minimum clearance between rough ground and untreated subfloor joists? -
ANSWER18 inches

Who may remove asbestos? - ANSWERContractor with Asbestos Certification on
license.

Which of the following is NOT likely to be found in significant proportions in granular
soil?

A. Gravel
B. Sand
C. Silt
D. Clay - ANSWERClay

Stiles and rails are used on which of the following?

A. Furred walls
B. Roofs
C. Windows
D. Slabs - ANSWERWindows.

A stile is the vertical edges of the window and the rails are the bottom and top.

What does a high slump test indicate? - ANSWERToo much water.

Metal concrete forms should be?

A. Oiled
B. Watered
C. Placed against gravel
D. Discarded after each use - ANSWEROiled

What does the R mean in a description of insulation? - ANSWERResistance

What kind of door would you install for someone with a disability?

A. Automatic with minimum of 3 seconds to close
B. Automatic with maximum of 5 seconds to open
C. Manual with maximum of 8.5 pounds to operate

, D. Either A or C - ANSWEREither A or C

Triple-walled metal chimney installations are regulated by: - ANSWERICC

ICC-IBC-IRC is the international code council. IBC is international building code
commercial. IRC is the international residential code.

If you are a general contractor, you should call a specialty contractor when: -
ANSWERYou encounter an unfamiliar trade.

When a stairway serves a public building, what is the minimum number of steps for
which a handrail is required? - ANSWERTwo

What is the minimum underlayment for asphalt shingles? - ANSWER15 pounds

How long should you wait before sealing new tile work? - ANSWER2 weeks

When do you install insulation? - ANSWERAfter the electrical and plumbing are
approved.

When do you NOT need an exhaust fan in a bathroom? - ANSWERWhen there is a
window in the bathroom.

What is a bush-hammer used for? - ANSWERRoughen surface of hardened concrete.

When you say a wall is perfect it is: - ANSWERBoth plumb and straight.

The purpose of a batter board in concrete work is: - ANSWERSupport layout strings
when location foundations.

What is the difference between a hip jack rafter and a common rafter? - ANSWERA hip
jack runs from the top plate to a hip rafter, but a common rafter runs to the ridge board.

When should you float a concrete surface? - ANSWERAs soon as the water sheen
evaporates

When installing drywall screws you should:

A. Countersink
B. Drive just below the face of the board
C. Leave slightly above the surface
D. Use the highest torque setting - ANSWERDrive just below the face of the board
without breaking the paper.

Before placing tile with mastic, you should: - ANSWERSeal the surface.

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Americannursingaassociation. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $17.89. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

79271 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$17.89
  • (0)
  Add to cart