Exam (elaborations)
G2 PRACTICE EXAM #2 QUESTIONS AND ANSWERS 2024
- Course
- Institution
G2 PRACTICE EXAM #2 QUESTIONS AND ANSWERS 2024
[Show more]
Content preview
G2 PRACTICE EXAM #2A condensing warm air furnace has?
A. Operates without a heat exchanger.
B. One heat exchanger.
C. Three heat exchangers.
D. Two heat exchangers. - ANSWERS-D. Two heat exchangers.
What is the maximum high limit setting for a gravity furnace?
A. 150F
B. 200F
C. 250F
D. 350F - ANSWERS-D. 350F
How far should a vent terminate from a window if the appliance firing rate is 65
000 BTU?
A. 6"
B. 10"
C. 12"
D. 36" - ANSWERS-C. 12"
An appliance should not exceed the rated input less than?
,A. 80%
B. 75%
C. 25%
D. 90% - ANSWERS-D. 90%
Should a high pressure leak test be performed if a section of more than 20 feet is
added to a existing gas piping system?
A. Yes
B. No
C. Soap test only
D. Dial and soap test - ANSWERS-A. Yes
What is the closing force of a 2' gas regulator?
A. Spring tension
B. Operating pressure
C. Downstream pressure
D. Leak limit orifice - ANSWERS-C. Downstream pressure
A scotch marine boiler is what type of boiler?
A. Two pass boiler.
B. Copper tube boiler.
C. Fire tube boiler.
,D. Four pass water tube boiler. - ANSWERS-C. Fire tube boiler.
In what section of the B149.1 code book can you find specs on a dirt pocket?
A. Section #2
B. Section #5
C. Section #4
D. Section #6 - ANSWERS-D. Section #6
What would be the minimum area needed to service a appliance?
A. 24" x 18"
B. 24" x 24"
C. 36" x 36"
D. 36" x 48 - ANSWERS-B. 24" x 24"
Can a 2 " diameter round duct be used as combustion supply air to an appliance?
A. Yes.
B. Yes if total input of appliances exceed 400,000 BTU.
C. Yes if ventilation air is at least 10 in square.
D. No. - ANSWERS-D. No.
If condensation occurs on the inside of the window when the outdoor
temperature drops, The humidistat should be?
, A. Increased.
B. Set to Zero.
C. Set to 100%.
D. Decreased. - ANSWERS-D. Decreased.
129) A fan control:
A. Starts and stops the blower.
B. Starts the blower when the plenum is up to temperature.
C. Ensure the burner will not start if overheating occurs.
D. Shuts the blower off on safety only. - ANSWERS-A. Starts and stops the blower.
An adjustable sheave pulley is most commonly used on a:
A. Motor shaft.
B. Variable speed motor.
C. Blower shaft.
D. Direct drive motor. - ANSWERS-A. Motor shaft.
What is the minimum diameter of a pressure gauge needed to perform leak test
on gas piping?
A. 2"
B. 2 - 3/4"
C. 3"
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Teacher101. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $16.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
73091 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now