Exam (elaborations)
F60 Fire Guard/fdny g60 PRACTICE TEST With 100% complete guide
- Course
- Institution
F60 Fire Guard/fdny g60 PRACTICE TEST With 100% complete guide
[Show more]
Content preview
F60 Fire Guard/fdny g60 PRACTICE TESTWith 100% complete guide
Sprinkler system must NOT be shut off or impaired while hot work is performed - ANS Place
damp cloth guards on individual sprinkler heads
The person conducting the fire watch ______ have other duties - ANS CANNOT
A portable fire extinguisher with a rating of _________ is required and should be within ____
feet travel distance hot work area - ANS 2-A:20-B:C///30
For ROOFING OPERATIONS, a portable fire extinguisher with a minimum rating of ______ is
required - ANS 3-A:40-B:C
Fire watch on floors below is ______ - ANS required
The fire watch must continue for a minimum of ____ minutes after the hot work is done -
ANS 30
For any CNG or LPG torch operations, the first inspection shall be conducted ___ minutes after
completion. The second inspection shall be conducted _______ after completion of torch
operations. - ANS 30 min///1 hour
The fire guard or fire watch personnel must complete a signed inspection report and it must be
submitted to and retained by the person in charge of the torch operations. - ANS The report
must be made available and maintained on the premises for a minimum of 48 hours after the
work is complete.
Most common fuel gasses used in blowtorches are ______ - ANS LPG (butane, propane)
natural gas (methane) (either CNG or piped natural gasses)
Soldering and brazing temperatures are typically______ - ANS 840 degrees F
Oxy-acetylene generates the highest temperature which can reach up to _____ - ANS 6000
degrees F
Gas torches can exceed _________ and are used for burning weeds, melting ice, or applying
tar to a roof - ANS 2000 degrees F
If the torch operation is to stop for a period of _________________, the torch vale must be
closed and the gas supply to the torch must be completely shut - ANS 1 hour or more
, Containers, valves, regulators, hose and other apparatus and fittings for oxygen must be kept
free of __________. - ANS oil or grease
Backfire - ANS this occurs when the flame of a torch goes out and there is a loud snap or
pop
Flashback - ANS This occurs when the cutting or welding flame burns inside the torch or
the hoses and it is usually accompanied by a whistle or hissing noise. As soon as it is noticed,
the torch control valves should be closed. This indicated there is something wrong with the
equipment, either damage or blockage
A hot work area should be _____ - ANS well ventilated
Whoever is working with hot work equipment CANNOT wear _____________ since it is
susceptible to burning and ignition - ANS frayed clothing
Empty containers must be __________ - ANS handled in the same manner as full ones
Gas containers must be replaced when empty. - ANS It is ILLEGAL to refill gas container
All gas containers, whether CNG or LPG, must be secured in an __________ - ANS upright
position and must not be stacked or stored on shelves
All gas containers and related equipment must be _________ - ANS protected from
extreme temperature and physical damage
The control valve of any gas container must be _______ - ANS opened by hand
Acetylene valves shall not be opened more than ______ - ANS 1 ½ turns
The purpose of a regulator is to ________ - ANS control the flow of gas and lower the
pressure from the container to the appliance. It also acts like a safely barrier between the high
pressure of the gas container and the end use appliance
Hoses must be as _______ protecting from mechanical injury - ANS short as practical
No hose is allowed to exceed ____feet - ANS 30
A compressed gas container MUST NOT ________ - ANS be rolled on its side or its rim,
only by approved lifting equipment
Ropes, chains or slings shall NOT be used to ________ - ANS suspend compressed gas
containers unless such containers have been designed for such handling
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller excellentrevision964. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
79650 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now