ICC REINFORCED CONCRETE FINAL CODE TEST
2024-2025 QUESTIONS WITH 100% CORRECT
ANSWER
An acceptable reinforcing steel support mechanism for a 24-inch deep footing are?
---Minimum concrete cover for bundled bars of any size need not be greater than 2
inches, unless they are in a member that's permanently cast against earth
---specified concrete cover for headed shear stud reinforcement shall not be less then
the cover requirement for the member in which the stud reinforcement is located
---Concrete cover for the flexural members, walls, and compression members with an
effective depth of 8-inches can vary -3/8 of an inch
---Concrete cover for members in highly corrosive environments will typically remain the
same as cast against earth - CORRECT ANSWER Concrete cover for members in
highly corrosive environments will typically remain the same as cast agonist earth
As a general rule, Lap splicing bar larger then NO.11 Is?
-not permitted
-permitted
-permitted if bars will be in tension within the structural member
-permitted only if bars are within a bundle - CORRECT ANSWER not permitted
,ICC REINFORCED CONCRETE FINAL CODE TEST
2024-2025 QUESTIONS WITH 100% CORRECT
ANSWER
before new concrete is placed, construction joints must be?
-blown free of dirt and debris
-wetted ,and standing water removed
-sand blasted
- treated with a bonding agent - CORRECT ANSWER wetted, and standing water
removed
grade 60 reinforcing steel has an ultimate strength of?
-60,000
-75,000
-90,000
-100,000 - CORRECT ANSWER 90,000 psi
The__________may waive requirements for the employment of a special inspection
agency if he/she finds that the construction is of minor nature.
-building official
-engineer or architect of record
-owner
-all of the above - CORRECT ANSWER building official
, ICC REINFORCED CONCRETE FINAL CODE TEST
2024-2025 QUESTIONS WITH 100% CORRECT
ANSWER
what is the maximum allowable center to center spacing of spliced bars in a non-contact
lap splice for the flexural members?
-6 inches
-4 inches
-8 inches
-2 inches - CORRECT ANSWER 6 inches
Drilled cast-in place concrete piles that poured with concrete having an f'c of 2500 psi
need special inspection?
-only when required by the building official
-at the engineers discretion
-at all times
-when poured with concrete having an air entrainment greater then 3% - CORRECT
ANSWER at all times
The type of portland cement best suited for general use when a moderate heat of
hydration is desired is
- Type I
- Type II
- Type III
- Type V - CORRECT ANSWER Type II
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller ACELEARNERS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.49. You're not tied to anything after your purchase.
