OSHA 500 EXAM LATEST 2023-2024 ACTUAL EXAM 300
QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+
which of the following devices utilizes cables or straps that are attached to the operator's hands and a
fixed point? - ANSWER-restraint
when using abrasive wheels on mounted wheels, used in portable operations, 2 inches and smaller in
diameter, it does not require safety guards - ANSWER-true
abrasive wheel machinery guards must meet the design secifications of the american ational standard
safety code for the use, care, and protection of abrasive wheels, ANSI B7.1-1970 - ANSWER-true
__________ motions may be harardous becasue, during the back and forth or up and down motion, a
worker may be struck by or caught between a moving and a stationary part - ANSWER-reciprocating
in-running nip point hazards are caused by - ANSWER-the rotating parts on machinery
the point of operation is - ANSWER-the area on a machine where work is performed
a good safeguarding system eliminates the possibility of the operator or other workers placing parts of
their bodies near hazardous moving parts - ANSWER-true
the purpose of machine guarding is to protect the machine operator and other employees in the work
area from the hazards created by - ANSWER-all of the above
_______ are guards which mount behind the wheel and turn with it - ANSWER-revolving cup guards
the __________ process requires the employer must establish an energy control program consisting of
energy control procedures, employee training and periodic inspections - ANSWER-lockout/tagout
,if there is a drop of more than 4 feet, a ____________ should be provided when there is exposure to
falling materials - ANSWER-removeable toeboard
trench or conduit covers and their supports, when located in plant roadways, must be designed to carry
a truck rear-axle load of at least 20000 lbs - ANSWER-true
when walking or working on scaffolds, you should always be aware of the hazards of overhead owerlines
- ANSWER-true
covers or guardrails are not required for open pits , tanks, vats , or ditches - ANSWER-false
every workroom floor must be maintained in a - ANSWER-a and b
grab bars must be spaced by a continuation of the rung spacing when they are located in the
____________ position - ANSWER-horizontal
hinged floor openings must have a cover of standard strength and construction equipped with standard
railings or permanently attached so as to leave - ANSWER-only one exposed side
defective ladders must be withdrawn from use and marked - ANSWER-dangerous, do not use
some of the most frequently violated standards in regards to walking and working surfaces involve -
ANSWER-housekeeping
a standard railing must consist of - ANSWER-all of the above
in circumstances for which it is impossible to provide such ventilation, airline respirators or hose masks
approved for this purpose by OSHA must be used - ANSWER-false
ventilation requirements are established on the basis of which of the following in arc and gas welding
which govern the amount of contamination to which welders may be exposed - ANSWER-all of the
above
, cables with splices within 10 feet of the holder may not be used - ANSWER-true
the _______ is responsible for determining if combustible materials and hazardous area are present or
likely to be present in the work location - ANSWER-supervisor
all doors and access panels of all resistance welding machines and control panels must be ________to
prevent access, by unauthorized persons, to live portions of the equipment - ANSWER-a and c
common side effects of exposure to high concentrations of cadmium fumes include - ANSWER-lung
irritation
empty cylinders must have their valves - ANSWER-closed
a fire watch must be maintained for at least ______ after completion of welding or cutting operations to
detect and extinguish possible smoldering fires - ANSWER-30 minutes
all aisles and passageways must be ______ and permanent aisles and passageways must be
permanently marked - ANSWER-kept clear, permanently marked
employers must conduct an evaluation of each powered industrial truck operators performance at least
once every____ years - ANSWER-3
when using slings it is advised to engage in shock loading - ANSWER-false
training programs on proper lifting techniques should cover several topics including - ANSWER-all of the
above
trucks approved for fire safety also must bear a label, or some other identifying mark, indicating -
ANSWER-it is accepted by a nationally recognized testing laboratory
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller 2024newestexams. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $27.99. You're not tied to anything after your purchase.
