Exam (elaborations)
API 570 test questions and answers graded A+ 2024/2025
- Course
- Institution
API 570 test questions and answers graded A+ 2024/2025
[Show more]
Seller
Follow
Content preview
API 570 testSection 1 - Scope
1-Which of the following activities is NOT included in the scope of API 570? - ANSOperating
a pipe system
2-Which of the following activities is NOT included in the scope of API 570? -
ANSPerforming pipe fabrication
3-API 570 pertains to: - ANSOnly to metallic and FRP pipe
4-API 570 pertains only to: - ANSPipe and their associated relief devices
5-The inspector discovers a problem on a pipe that requires corrective action. Who is
responsible to respond to this issue? - ANSOwner/User
6-API 570 is used: - ANSBy petro-chemical facilities
7-API 570 takes effect: - ANSOnce the pipe is places in service
8-Companies that use API 570 must: - ANSEither employ or have access to an authorized
inspection agency
9-During a piping repair, if there is a conflict between the requirements of API 570 and the
construction code, which should be followed? - ANSAPI 570
10-Duringa piping alteration, if there is a conflict between the requirements of API 570 and
the construction code, which should be followed? - ANSAPI 570
11-An in-service pipe in being repaired or altered. If there is a conflict between the
requirements of API 570 and the legal jurisdiction, which should be followed? - ANSThe
most stringent requirements
12-An in-service piping system is inspected. If there is a conflict between the requirements of
API 570 and the legal jurisdiction, which should be followed? - ANSThe most stringent
requirements
13-The requirements of API 570 are considered optional for which of the following piping
systems? - ANS300 psig steam system
14-The requirements of API 570 are considered optional for which of the following piping
systems? - ANSCategory D piping
15-Which of the following chemical plant piping is NOT included in the scope of API 570? -
ANS4 NPS low-density polyethylene pipe
,16-Which code is used for Fitness for Service evaluations? - ANSAPI 579
17-Which code is used for RBI evaluations? - ANSAPI 580
Section 2
1-During an in-service internal inspection, a crack is discovered on a longitudinal weld. This
crack can be evaluated to which code? - ANSAPI 579
2-Which code provides requirements for hot tapping? - ANSAPI 2201
3-Which publication provides information on corrosion mechanisms? - ANSAPI 571
4-Which publication is used for RBI assessments? - ANSAPI 580
5-Which recommended practice is used for guidance in inspecting and testing valves? -
ANSAPI 578
**6-Which document can be used when determining soil resistivity? - ANSASTM G57
**7-Which document can provide more information on Injectionmand Mixing points? -
ANSNACE RP 34101
Section 3
1-Which of the following is considered a piping alteration? - ANSReplacement 4 NPS portion
of a line with a 6 NPS section
2-An alteration on a piping system is defined as: - ANSAny physical change with design
implications
3-Which of the following inspection organizations is NOT considered an acceptable API 570
Authorized Inspection Agency? - ANSPiping fabricator
4-Which of the following is considered an API 570 Authorized Inspection Agency? - ANSThe
inspection organization of the jurisdiction
5-A CML is: - ANSA point or plane through the pipe
6-A critical check valve is one that: - ANSCould cause a hazardous event (like Boom!) if it
fails
7-A defect is defined as: - ANSA discontinuity that exceeds the applicable code's criteria
8-What is maximum diameter of an examination point on an 8 NPS line? - ANS2"
9-What is maximum diameter of an examination point on a 12 NPS line? - ANS3"
10-An imperfection is: - ANSDefined as a flaw
, 11-An indication is: - ANSA response from an NDE examine
12-An injection point does NOT include: - ANSProcess mix points
13-What is an integrity operating envelope? - ANSKey process limits that are set because of
a potential degradation mechanism
14-What is management of change? - ANSTerm used to describe a documented system to
review process changes
15-What is a mixing point? - ANSA piping component that combines two process streams of
differing composition
16-Off-site piping is: - ANSPiping in a plant that us not in a process unit
17-A piping circuit: - ANSIs piping of similar metallurgy that is exposed to same process
envoirment
18-The purpose of PMI is to determine: - ANSThat piping components are specified
materials
19-Pressure design thickness: - ANSConsiders only design pressure and design pressure
and design temperature
20-A piping repair is defined as: - ANSThe work necessary to restore a piping system to a
suitable safe condition
21-A propane 4 NPS line has experience damage by CUI. About 150 ft will be replaced
during the next turnaround. Which of the following is true? - ANSThis work is considered a
repair
22-Which of the following inspection oranizations is NOT considered an acceptable API 570
Repair Organization? - ANSThe governing jurisdiction based on the location of the piping
system
23-Which of the following is NOT considered a piping rerate? - ANSIncreased the fluid
viscosity
24-Secondary process piping is defined as pipe that is: - ANSDownstream of normally
closed block valves
25-Small bore piping is defined as pipe: - ANSLess than or equal 2 NPS
26-The soil-to-air zone is considered to be: - ANS6 inches above the interface and 12 below
the interface
Section 4
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Qualityexam. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
76669 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now