IBC EXAM PREP UPDATED Exam Questions and CORRECT Answers
5 views 0 purchase
Course
IBC
Institution
IBC
IBC EXAM PREP UPDATED Exam
Questions and CORRECT Answers
the shear capacity for horizontal wood frame gypsum board diaphragm ceiling is how many
POF for gypsum board 1/2 inch thick with 16 on Center spacing of - Correct Answer- 90 plf
in exterior plaster, a minimum of 0.019 of an inch number ...
IBC EXAM PREP UPDATED Exam
Questions and CORRECT Answers
the shear capacity for horizontal wood frame gypsum board diaphragm ceiling is how many
POF for gypsum board 1/2 inch thick with 16 on Center spacing of - Correct Answer- 90 plf
in exterior plaster, a minimum of 0.019 of an inch number 26 galvanized galvanized sheet
gauge corrosion resistant weep screed with a minimum vertical attachment flange of what
must be provided at or below the foundation plate line on exterior wall studs - Correct
Answer- three and a half inch
in exterior plaster, the weep screed must be placed a minimum of how many inches above the
Earth or 2in above paved areas how many inches must weep screed be placed above - Correct
Answer- 4 inches
what is the minimum time. For moist curing between the first and second cement plaster code
in an exterior application how many hours? - Correct Answer- 48
what is a minimum thickness of reinforced gypsum concrete how many inches? - Correct
Answer- 2 inch
what is the maximum flame spread index of foam plastic insulation used as interior wall or
ceiling finish? Which section is this located in - Correct Answer- 75 flame spread index,
located in section 2603 foam plastic insulation
what is the minimum density of interior plastic trim how many PCF which section is this
located in? - Correct Answer- 20 PCF 320 kg in section 2604 interior finish and trim chapter
26 Plastics
what is a Max flame spread index of foam plastic insulation used as interior wall or ceiling
finished - Correct Answer- 75
what is the minimum density of interior plastic trim PCF? - Correct Answer- 20 PCF
, blank? Is masonry in which the tensile resistance of the masonry is taken into consideration
and the effects of stresses in reinforcements are neglected what type of Masonry? - Correct
Answer- plain Masonry
pre-stress masonry is masonry in which internal stresses have been introduced to counteract
potential? Stresses in masonry resulting from applied loads. compressive? Sheer? Tinsel? -
Correct Answer- tinsel
the center of gravity of projecting masonry or molded cornices must lie within the middle of?
Of the sporting wall. one third? 1/2? 2/3? - Correct Answer- one third
the total minimum thickness of front, back and side walls of a smoke chamber walls must be
how many inches of solid Masonry? - Correct Answer- 8 in
fireplace Hurst must have a minimum thickness of? Inches - Correct Answer- 4 in
in fireplace installations, spaces between wood joists, beams or headers must be fireblock to a
depth of? - Correct Answer- 1 inch
chimneys must extend a minimum of how many feet higher than any portion of the building
within 10 ft? - Correct Answer- 2 feet
chimney flues that are connected to more than one Appliance, one must not be less than the
area of the largest connector Plus what percentage of the area's additional chimney
connectors? - Correct Answer- 50%
what is the minimum air space clearance required between masonry chimneys located in the
interior of a building and combustibles components how many inches? - Correct Answer- 2 in
where masonry chimneys are constructed as part of a masonry or concrete walls, combustible
materials must not be in contact with the masonry or concrete wall less than? How many
inches from the inside surface of the nearest flue lining? - Correct Answer- 12 in
a collector is a horizontal diaphragm element? And in line with the applied force that collects
and transfers diaphragm Shear forces to the vertical elements of the lateral Force resisting
system or distributes forces within a diagram or both - Correct Answer- parallel
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller MGRADES. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
