NWSA TTT-1 2024 For TEP @ Wake Tech (TTT-1 2024.
For The Revised TTT Exam): Qs & As
When regarding RF energies, LOTO stands for? Right Ans - Lock Out Tag
Out
What does a ground fault interrupter (GCFI) do? Right Ans - Shuts off the
flow of electricity, senses a short circuit, helps prevent electrocution
What is an example of a job task that requires LOTO? Right Ans - Climbing
an AM tower
What should you do if a drill plug is missing its ground prong? Right Ans -
Tag it out and remove it from service
Applying a lubricant such as WD-40 to stubborn structural bolts will...?
Right Ans - It can result in over-torquing and should never be done
What is a situation that will increase the chances of electrocution when
welding? Right Ans - Working in wet conditions
What is considered an exothermic welding process? Right Ans - CAD
welding
For what procedure is exothermic welding commonly used? Right Ans -
Splicing ground wires
An antenna that transmits RF in all directions is called?: Right Ans - Omni-
directional
What is the result when a U-Bolt is properly tightened? Right Ans - Both
sides are tightened evenly
What should you NOT do if a coworker has been overexposed to RF? Right
Ans - Pour ice water over the person's head and body
, What RF frequencies have the greatest thermal effects on the human body?
Right Ans - FM
What is the correct action when tightening a stubborn bolt? Right Ans -
Remove nut/bolt and debur the threads
When installing large diameter ( >1" ) bolt holes in a monopole shaft, the best
tool to use is: Right Ans - Mag drill with an annular cutting bit
Most large tower-owning companies require that you do what when first
arriving onsite? Right Ans - Call them to check into the site
Which of the following would be considered a "non-standard" structure?
Right Ans - Water Tank
Which of the following bolt grades are typically NOT allowed for structural
bolting purposes? Right Ans - A307 (These particular bolts are half the
strength of most bolts)
What would you call an A325 bolt being loaded in this configuration? Right
Ans - A325X (Means threads are excluded)
The most critical areas to check during a structural inspection of a monopole
are: Right Ans - Leveling nuts and baseplate weld
A typical guyed tower with two guy anchor rings must have at least ______
structural grounding connections Right Ans - 7
Wires are used to _____________ guyed towers Right Ans - Stabilize
Name a concrete deficiency which is specified in TIA-222, appendix J Right
Ans - Spalling
Which of the following is NOT an acceptable nut locking device for structural
bolts? Right Ans - Loctite Threadlocker
Formed guy grips are used to connect to:? Right Ans - Cable
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LeCrae. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.