Millwright Level 1 UPDATED Exam Questions and CORRECT Answers
9 views 0 purchase
Course
Millwright
Institution
Millwright
Millwright Level 1 UPDATED Exam
Questions and CORRECT Answers
On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: -
Correct Answer- 1/8 inch
The kind of abrasive material used in grinding wheels for general purpose applications is: -
Correct Answer- alum...
Millwright Level 1 UPDATED Exam
Questions and CORRECT Answers
On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: -
Correct Answer- 1/8 inch
The kind of abrasive material used in grinding wheels for general purpose applications is: -
Correct Answer- aluminum oxide
A blotter is used on a grinding wheel to: - Correct Answer- protect the flanges from the
abrasize grit, display information about the wheel and compensate for the uneven surfaces on
the wheel
Flanges should at least be: - Correct Answer- 1/3 the diameter of the wheel
The best wheel to use for cleaning scale and dirt off a workpiece is the: - Correct Answer-
wire wheel
What is a natural abrasive? - Correct Answer- made of natural material rather than synthetic
Under properties of abrasives, to what does the term hardness refer? - Correct Answer- ability
of a material to scratch or penetrate another material
The ____ is the part of the wheel that holds the grains together - Correct Answer- bond
Markings for the wheel identification can be found on the _______ - Correct Answer- Blotter
What is the recommended speed to run a grinding wheel? - Correct Answer- Never run it
faster that the max RPM of the grinding wheel
How should you start a grinder? - Correct Answer- Stand off to the side and wait a full
minute
,Is 46 or 60 the coarser grit? - Correct Answer- 46
What are the 2 most commonly used abrasive materials? - Correct Answer- Aluminum oxide
and silicone carbide
For what purpose is the diamond dresser used? - Correct Answer- When a very fine finish is
required
What is the purpose of ring test? - Correct Answer- to check for cracks
If a grinding wheel makes a ringing sound what does that mean? - Correct Answer- wheel is
not cracked
What is the purpose of truing a grinding wheel? - Correct Answer- Restores the shape of the
wheel and makes the outer surface of the wheel concentric with its bore
An out of balance wheel: - Correct Answer- vibrates
Belt grinders are useful for: - Correct Answer- quickly deburring and chamfering a workpiece
What is the purpose of a GFCI? - Correct Answer- Senses drop in current and switches power
off
The kind of abrasive material use in grinding wheels for general purpose application is: -
Correct Answer- aluminum oxide
Is it safe to carry a portable grinder by the power cord? - Correct Answer- False
Is it safe to use standard sockets with electric impact wrenches - Correct Answer- False
The larger the power drill, the slower the RPMs and the higher the torque - Correct Answer-
True
, Can you use conventional drill bits with a hammer drill? Why or why not? - Correct Answer-
Yes of the hammer drill has a switch to turn off hammer action
Most cordless drills have torque control - Correct Answer- True
Prolonged use of power or air tools can cause carpal tunnel sydrome - Correct Answer- True
Is it safe to run an impact wrench with a universal joint and socket attached - Correct Answer-
No because it may throw off attachments
What conditions would you use a GFCI - Correct Answer- Wet conditions
What 3 things does a GFCI protect: - Correct Answer- 1. Overload 2. Overcurrent 3. Ground
fault protection
A GFCI prevents all electrical shocks - Correct Answer- False
Higher voltage on a battery means: - Correct Answer- Greater power of tool
What type of power load must be used in the low velocity tool? Why? - Correct Answer-
Power load with a crimped end must be used cause high power load would get lodged in the
tool
6 colours ranging from lowest strength to highest strength for power load are: - Correct
Answer- 1. Grey 2. Brown 3. Green 4. Yellow 5. Red 6. Purple
Power loads should not be carried loosely in pockets or aprons. Why? - Correct Answer-
Could be set off causing serious injury or death
Fasteners used in explosive actuated tools are: - Correct Answer- Manufactured from special
steel and tempered
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller MGRADES. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
