Exam (elaborations)
OECP EXAM TEST MULTIPLE CHOICE QUESTIONS AND ANSWERS|A+ GRADED
- Course
- Institution
OECP EXAM TEST MULTIPLE CHOICE QUESTIONS AND ANSWERS|A+ GRADED
[Show more]
Content preview
OECP EXAM TEST MULTIPLE CHOICEQUESTIONS AND ANSWERS|A+
GRADED
How is site access and usability identified and evaluated?
A. Contacting crane manufacturer for permission
B. Checking ASME b30-5 requirements
C. Slowly driving crane onto site being wary of hazards
D. Job site inspection, taking measurements and comparing
measurements to crane specs
Verified Answer -D. Job site inspection, taking measurements and
comparing measurement to crane specs.
Construction site hazards and restrictions such as a electric power lines
and piping are located and identified by:
A. Setting the crane then determining the location and clearance of
hazards
B. Setting the crane and using the signalman
C. Reviewing site safety requirements
D. A pre-operational work site inspection and questioning the job site
supervisor
Verified Answer -D. A pre-operational work site inspection and
questioning the job site supervisor
What is the best procedure to follow when underground utilities may be
present?
A. Set outriggers pads gently
,B. Contact local utility company
C. Use blocking under outrigger pads
D. Do not set outriggers, remain on tires
Verified Answer -B. Contact local utility company.
When arriving in the crane at a job site, the operator should first
determine the condition of the:
A. Cranes setup location
B. Access roads
C. Parking lot
D. Headache ball
Verified Answer -B. Access Roads
When preparing to set up a mobile crane for operation, the following
steps must be taken by the operator:
A. Check ground condition for stability
B. Check overhead crane clearance
C. Check swing clearance
D. All of the above
Verified Answer -D. All of the above
According to OSHA, accessible areas of the operating crane must always
be barricaded within:
,A. The swing radius of the crane
B. The car-body or chassis
C. The swing radius of the rear of the rotating super structure
D. The distance between the car-body or chassis and the boom tip
Verified Answer -C. The swing radius of the rear of the rotating super
structure
If an operator is working in a new construction area, confirmation of the
surfaces ability to support anticipated loads should be confirmed by what
means?
A. Consulting with the rigging superintendent
B. Relying upon his own experience
C. Seeking advice from qualified engineer or site supervisor
D. Getting advice from another operator
Verified Answer -C. Seeking advice from qualified engineer or site
supervisor
What effect does the proper use of mats, blocking, or cribbing, and
outriggers or crawlers have to the suitability of the supporting surfaces?
A. Allows the use of longer booms and jibs
B. Allow the use of maximum counterweight
C. Increases crane stability and capacity
D. Better distributes and lessens loads on the supporting surface
Verified Answer -D. Better distributes and lessens loads on the
supporting surface.
, Pre-operational inspections are necessary and required:
A. Only when the operator is assigned to a different crane
B. Only after repairs or adjustments have been made
C. If the crane has a history of breakdowns and repairs
D. To enhance cranes safety by discovering discrepancies prior to
operating
Verified Answer -D. To enhance cranes safety safety by discovering
discrepancies prior to operating
When assembling or dismantling lattice booms, it is safe to work under
the boom:
A. If there is tension on the boom pendant line
B. To remove the bottom pins only
C. As long as the sections are blocked
D. None of the above
Verified Answer -D. None of the above
The proper way to calibrate a boom angle indicator is:
A. Use a slide rule
B. Boom against the stops and set the indicator at 90 degrees
C. Using a level, raise the boom to horizontal and set the indicator at 0
degrees
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller AcademicAllure. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $16.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
79650 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now
