An engineer scale is:
a). A measuring device that has measurements as a given number of feet per
inch.
b). A measuring device that has measurements as a given number of inches
per foot.
c). A measuring device in which a fraction of an inch equals 1 foot.
d). None of the above. Right Ans - a). A measuring device that has
measurements as a given number of feet per inch.
In calculating the available water capacity, pressure loss through the water
meter should not exceed what percentage of the minimum static water
pressure available?
a). 5
b). 15
c). 25
d). 10 Right Ans - d). 10
The maximum water flow through the water meter should not exceed:
a). 75% of the safe flow of the meter.
b). 50% of the safe flow of the meter.
c). 25% of the safe flow of the meter.
d). 10% of the safe flow of the meter. Right Ans - a). 75% of the safe flow of
the meter
What is the maximum acceptable velocity of the water flow through the
copper service line?
a). 10 fps
b). 9 psi
c). 9 fps
d). 5 fps Right Ans - c). 9 fps
Water loss in plant material is a result of:
a). Solar heat
b). Evapotranspiration
c). Run-off
d). Excessive drought periods Right Ans - b). Evapotranspiration
, Evapotranspiration is a combination of:
a). Humidity and solar heat
b). Evaporation and transpiration
c). Solar radiation and wind
d). Soil type and evaporation Right Ans - b). Evaporation and transpiration
What is capillary action? a). The main effect distributing water vertically
through the soil.
b). The main effect distributing water through the piping.
c). The main effect distributing chemicals in the soil.
d). The main effect distributing water horizontally through the soil. Right
Ans - d). The main effect distributing water horizontally through the soil.
Which soil type has the slowest infiltration rate?
a). Loam
b). Sand
c). Clay
d). Sandy loam Right Ans - c). Clay
Head spacing is calculated as a percentage of what?
a). The area the head covers
b). Diameter of the spray of a given head
c). Radius of the spray of a given head
d). Half of the radius of a given head Right Ans - b). Diameter of the spray of
a given head
Head to head spacing on all sprinkler heads is considered?
a). 70% spacing
b). 40% spacing
c). 10% spacing
d). 50% spacing Right Ans - d). 50% spacing
What would 60% spacing be on a 12' spray head?
a). 14.40 feet
b). 7.2 feet
c). 10 feet
d). 12 feet Right Ans - a). 14.40 feet
(Use the diameter of the head which is 24' (12'x2)
(24' diameter x .60 = 14.40))
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LeCrae. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.49. You're not tied to anything after your purchase.