Oilers/Plant Tenders (HHC) Civil Service Exam 2024 with 100% correct answers
6 views 0 purchase
Course
Oilers/Plant Tenders Civil Service
Institution
Oilers/Plant Tenders Civil Service
The texture of an aluminum-soap lubricating grease is _________ correct answersStringy
The property of a lubricant the allows it to adhere to metallic surfaces is known as ________ correct answersOiliness
The physical appearance of a grease with a consistency number of four is MOST NEARLY ___...
The texture of an aluminum-soap lubricating grease is _________ correct answersStringy
The property of a lubricant the allows it to adhere to metallic surfaces is known as ________ correct
answersOiliness
The physical appearance of a grease with a consistency number of four is MOST NEARLY _________
correct answersHard
The one of the following measures that is commonly used to represent a rate of oil feed is drops per
________ correct answersMinute
The MOST important single property of a lubricating oil is its __________ correct answersViscosity
The rate of change in viscosity of a petroleum oil with its temperature is indicated by its __________
correct answersViscosity Index
The neutralization number of an oil is an indication of its __________ correct answersOrganic or Mineral
Acidity
Graphite is a form of __________ correct answersAnthracite Coal
The BASIC ingredient in the manufacture of lubricating greases is __________ correct answersSoap
A test of grease that identifies greases and indicates uniformity in their manufacture is known as the
__________ test. correct answersDropping-Point
,The bearing materials usually called "white metals" or Babbit metal consist MAINLY of __________
correct answersTin and Copper
It is GOOD practice in the installation of three new packing rings in a stuffing box to require that the
joints of the packing be spaced __________ degrees apart. correct answers120
The objective in the use of applicaors for wire-rope lubrication is to apply a smooth even film at a
temperature conducive to the __________ correct answersPenetration of the wire strands
The one of the following metals that is non-ferrous is __________ correct answersCopper
The common terms "heavy" and "light", applied to an oil, refer ONLY to the oil's __________ correct
answersViscosity
The ring in ring-oiled bearings has a diameter that is USUALLY __________ the journal the diameter.
correct answersTwice
A boiler feedwater regulator automatically controls the __________ the boiler. correct answersWater
Supply to
The dirty oil to be purified in an operating DeLaval Purifier enters the purifier bowl from the __________
correct answersTop of the machine
The APPROXIMATE ropm of a Sharpies oil purifier is __________ correct answers16,000
In order to have effective separation of purification in a Delaval Purifier, it is recommended that the oil to
be cleaned be heated to an APPROXIAMTE temperature of __________ correct answers160 degrees F
The one of the following that is NOT a method for removing contaminants from oil is __________ correct
answersCentripeting
,An engine indicator is an instrument that is used on a reciprocating engine to determine the __________
the engine. correct answersPerformance of
The MAXIMUM bearing oil discharge temperature at which a turbine beating may satisfactorily operate
is __________ correct answers200 degrees F
Generally, at which point should a turbine-driven generator, with an integral lubricating oil system, put
the lube oil cooler in operation? correct answersWhen the temperature of the hottest bearing reaches
100 degrees F
In modern practice, the method by which turbine-generator reduction gear surfaces NORMALLY recieve
lubrication oil is __________ correct answersPressure Circulation Lubrication
Lubrication for modern reciprocation air compressors is GENERALLY supplied by __________ correct
answersA Mechanical Force-Feed Oiler
Aftercoolers are put on MOST air compressor installations to __________ correct answersCondense
Moisture from Compressed Air
A pipe fitting having a male thread at one end, a female thread at the other end, and shaped to a ninety-
degree bend is called a(n) __________ correct answersStreet Elbow
The one of the following actions that MUST be taken during normal operation to clean a knife edge
(cuneo) strainer is __________ correct answersRotating the Cleaner Blades
Detergents are used in lubricating oils to __________ correct answersKeep Insoluble Matter in
Suspension
The purpose of adding an inhibitor to lubricating oil is to __________ the engine. correct
answersPrevent Sludge and Varnish Formation on Parts of
The relationship between lubricating oil viscosities and temperature is that the viscosities correct
answersDecrease with a Temperature Increase
, The ons of the following fluids that should be used when cleaning filter bags pressure-type lube oil filters
is __________ correct answersKerosene
The precaution, or precautions, that an oiler must take when he is using absorbent type lubricating oil
filters is to __________ correct answersMake Sure that the Particular Oil Additives are not Removed by
the Filter
The specific gravity of lubricating oil is USUALLY measured by means of a __________ correct
answersHydrometer
Of the following, the MOST important requirement of a refrigerator lubricant is that it have __________
correct answersFreedom from Water
The one of the following faults that would MOST generally cause a sudden increase in oil pressure in a
lubricating line to a bearing is __________ correct answersA Clogged Strainer
The wick used in a gravity oil-feed system is USUALLY made of __________ correct answersWool
A thrust bearing is LEAST likely to be fond on a(n) __________ correct answersReciprocating Pump
A valve that allows oil to flow in one direction only is GENERALLY called a __________ valve. correct
answersCheck
The one of the following types of oils MOST preferred for the hydraulic govenor of a reciprocating steam
engine is __________ oil. correct answersNon-Additive Turbine Type
The one of the following pumps that does NOT have moving parts to be lubricated is a __________
pump. correct answersJet
The LARGEST class of lubricants in common use is __________ correct answersMineral Oil
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller QUILLSKY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $19.49. You're not tied to anything after your purchase.
