100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
ASE MLR Certification Test QUESTIONS & ANSWERS(RATED A) $12.99   Add to cart

Exam (elaborations)

ASE MLR Certification Test QUESTIONS & ANSWERS(RATED A)

 1 view  0 purchase
  • Course
  • BMW Associate level
  • Institution
  • BMW Associate Level

Both A and B - ANSWER Technician observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? A only - ANSWER The tires of a ...

[Show more]

Preview 2 out of 10  pages

  • September 9, 2024
  • 10
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • ase mlr
  • BMW Associate level
  • BMW Associate level
avatar-seller
shantelleG
ASE MLR Certification Test QUESTIONS &
ANSWERS(RATED A)
Both A and B - ANSWER Technician observes that the brake fluid level is at the "Min" mark in the master
cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the
brake hydraulic system could be the cause. Who is right?



A only - ANSWER The tires of a vehicle are being rotated and balanced. Tech A says that the wheel
weight retaining clips must be matched to the rim profile. Tech B says that directional tires are rotated in
a criss-cross pattern. Who is right?



Safely exit the building - ANSWER When a shop fire cannot be immediately contained, the best thing to
do is warn others in the area, and:



300 amps for 15 seconds - ANSWER A fully charged battery rated at 600 CCA, the ambient temperature is
70 degrees which of these current and time periods should be used?



B only - ANSWER A vehicle's halogen headlamp bulbs are being replaced. Technician A says the glass part
of the bulb can only be handled with bare hands. Technician B says the headlamp may need to be
removed. Who is right?



0.728 - ANSWER On a Metric Micrometer upper sleeve reading 5.0mm with lower sleeve reading
0.50mm and a thimble reading of 0.01mm what is the overall reading?



A only - ANSWER The fuel filter on a fuel-injected vehicle is being replaced. Tech A says the fuel pressure
should be relieved before removing the filter. Tech B says that the arrow on the fuel filter should point
towards the fuel tank. Who is right?



The brake pedal feels low and spongy - ANSWER Which of these is an indication of air in the brake
hydraulic system?



Anaerobic - ANSWER Which of these cures in the absence of air?

, Fluid contaminated brake linings - ANSWER A grabbing brake condition can be caused by any of these
EXCEPT:




Excessive run out in the wheel - ANSWER A customer states that the left front tire loses air. Any of these
could be the cause EXCEPT:



OSHA - ANSWER Which of these agencies enforces commercial workplace safety and environmental
health regulations?



A only - ANSWER Technician A says that rosin-core solder should be used when soldering electrical
connections. Technician B says that a crimp and shrink connector can be used when repairing electrical
wiring. Who is right?



A only - ANSWER Both front wheels are to be removed from a vehicle. Technician A says that if a floor
jack is to be used to raise the vehicles, the vehicle should be supported with jack stands. Technician B
says that if an electric lift is to be used to raise the vehicle, jack stands should be placed at the four
corners of the vehicle. Who is right?



A only - ANSWER Technician A says that disconnecting the negative battery cable may be required to
disable the air bag system. Technician B says that a self-powered test light can be used to test air bag
system components. Who is right?



A only - ANSWER Technician A says that disconnecting the negative battery cable may be required to
disable the airbag system. Technician B says that a self-powered test light can be used to test air bag
system components. Who is right?



Replace the high-pressure hose - ANSWER While inspecting a vehicle's power steering system, the
technician observes a fluid leak coming from the high-pressure hose crimp connection. To repair the leak
the technician should:



Air in the cooling system - ANSWER After a coolant thermostat replacement, the engine overheats. This
could be caused by:

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller shantelleG. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $12.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

79271 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$12.99
  • (0)
  Add to cart