Exam (elaborations)
CSX Conductor Final Review Set with correct Answers
- Course
- Institution
CSX Conductor Final Review Set with correct Answers
[Show more]
Content preview
CSX Conductor Final Review Set withcorrect Answers
300.3 What is the speed that permits stopping within 1/2 field of vision, and also permits
stopping short of a train, car, on track equipment, and permits looking out for broken rail
while not exceeding 15 mph over switches, otherwise not exceeding 20mph? - Answer -
Restricted Speed
6104 Your key train has arrived at Midway Yard to make a pickup of 20 cars on the head
end of the train. After adding the cars and making the appropriate brake test, what
documents must be updated before departing? - Answer -CT-168
4509 T/F When a yardmaster is on duty, do not enter a yard or terminal without notifying
them of any Clearance implicated shipments in your train. - Answer -True
4505.1 When handling a train with one or more clearance implicated shipments, what
instructions must be included as part of the train documents if the shipment was not
authorized verbally? - Answer -Clearance Bureau Instructions
301.2 your train is authorized on the Atlanta subdivision at 50mph. While descending the
grade, you exceed the speed on a grade to 53mph. What action is required? - Answer -
Instruct engineer to slow down to authorized speeds
301.2 S/A your train is authorized at 40mph due to a temporary restricted speed due to an
authorized shipment. You exceed that by 7mph. Select all that are required. - Answer -1)
Direct the engineer to stop and report to the proper authority
2) Do not proceed until released by proper authority
401.3 S/A Rolling equipment must not foul track until it can be visually determined that? -
Answer -1) The intended route is clear
2) Switches and derails connected with the movement are properly aligned
407.1 S/A You have been instructed by the yardmaster to leave cars in track R14 where
the clearance points are not identified or visible. Identify the steps required to determine
, the clearance point. - Answer -1) Standing outside the rail and off the end of crossties,
extend your arm towards the equipment
2) Position the equipment an additional 50' car length into track where it can no longer be
touched.
401.8 S/A After operating a switch or derail, a switch must be properly aligned and checked
for proper fitment of the switch points. What else is true? - Answer -1) Ensure that the lever
is latched
2) Device is locked if equipped
406.8 S/A When shoving for a purpose other than making a coupling, you, must stop 50'
short of a: - Answer -1) Derail
2) Improperly lined switch
308.1 S/A Train Q79510 is operating in CP territory with a max speed of 60mph, when the
train has an undesired emergency. After inspection, the conductor relaces the air hoses.
After contacting the train dispatcher, how must the train proceed? - Answer -1) Train must
not exceed 20mph for 1 additional train length
2) Train must be governed by the rules of that territory
406.3 S/A You have been switching cars in a railyard and fouled two tracks. Before shoving
any cars into either track you must... - Answer -1) Ensure that there are no conflicting
movements
2) Ensure that no intervening highway rail or pedestrian crossings are open or ensure that
they have been made inaccessible
406.2 Unless protected by shove lights, who is responsible for protecting shove
movements? - Answer -A crewmember or other qualified employee
406.3 After coupling to a cut of cars, what must you do next? - Answer -Stretch the cars to
ensure that a coupling has been made
406.2 When shoving or pushing without shove lights or other technology, what must be
done? - Answer -Protect the movement by a crewmember or other qualified employee
300.4 What speed must not be exceeded when operating through a hand operated
crossover, not to/from the main track, unless specified otherwise in special instructions? -
Answer -10mph
Which of the following is true about authorized train speeds? - Answer -It must not be
exceeded
300.4 Your train is leaving the main track through a hand operated switch, and entering a
non signaled siding. What speed cannot be exceeded through the switch unless specified
otherwise? - Answer -15mph
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller millyphilip. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
73091 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now