CSX RCO Study Guide Questions with 100%
Correct Answers
130, 145 - ✔✔The main reservoir gauge is fully charged and fluctuates between
_____ and ____ psi.
brake pipe gauge (white needle) - ✔✔the _____ _____ ____ indicates brake pipe
pressure at the locomotive.
release, application, full - ✔✔The three settings on the independent brake are
______, _______ zone, and ______ application.
release, closed - ✔✔To cut out independent brake, independent brake handle must
be in the _____ position, and MU2-A Valve or dual port cut out valve must be in the
______ trail 24 position.
release, full, handle off, emergency - ✔✔The 6 positions and 2 zones of the
automatic brake are ______, minimum reduction, service zone, ______ service,
suppression, over reduction zone, ______ ___, and ______
1, 2 - ✔✔There is a communication range of ___ mile in direct mode and ___ miles in
repeater mode.
solicited, unsolicited - ✔✔A _____ message is a one that an operator requests with
the status switch, while one that is automatically generated but the system is an _____
message
, direction, reset - ✔✔In order to initiate a movement on the speed select lever, a
_____ must be selected and the ____ button must be pressed.
15 - ✔✔In the coast b setting on the speed selector lever, ____ lbs of independent
brake pressure are applied.
no - ✔✔In coast setting on speed selector lever, ______ brakes are applied.
1 - ✔✔The couple speed is regulated to ____ mph.
control speed, slow, stop - ✔✔The speed selector is the preferred method to ______
______, _____, and _____ the movement.
couple - ✔✔Movement speed should be initiated by selecting _____ speed on the
speed selector lever
stop, neutral - ✔✔To apply 3 step protect on an RCL, speed selector lever is placed to
_____, and the Direction selector is placed to _____.
independent brake - ✔✔The ________ ________ override lever is used to apply air
brakes on the remote control locomotive consist.
emergency - ✔✔Except for the ______ position, the independent brake override
lever does not apply brakes on the freight cars.
low, 15 - ✔✔The _____ position of the independent brake override lever applies 33%
(_______ lbs) independent application and release brake pressure.
Correct Answers
130, 145 - ✔✔The main reservoir gauge is fully charged and fluctuates between
_____ and ____ psi.
brake pipe gauge (white needle) - ✔✔the _____ _____ ____ indicates brake pipe
pressure at the locomotive.
release, application, full - ✔✔The three settings on the independent brake are
______, _______ zone, and ______ application.
release, closed - ✔✔To cut out independent brake, independent brake handle must
be in the _____ position, and MU2-A Valve or dual port cut out valve must be in the
______ trail 24 position.
release, full, handle off, emergency - ✔✔The 6 positions and 2 zones of the
automatic brake are ______, minimum reduction, service zone, ______ service,
suppression, over reduction zone, ______ ___, and ______
1, 2 - ✔✔There is a communication range of ___ mile in direct mode and ___ miles in
repeater mode.
solicited, unsolicited - ✔✔A _____ message is a one that an operator requests with
the status switch, while one that is automatically generated but the system is an _____
message
, direction, reset - ✔✔In order to initiate a movement on the speed select lever, a
_____ must be selected and the ____ button must be pressed.
15 - ✔✔In the coast b setting on the speed selector lever, ____ lbs of independent
brake pressure are applied.
no - ✔✔In coast setting on speed selector lever, ______ brakes are applied.
1 - ✔✔The couple speed is regulated to ____ mph.
control speed, slow, stop - ✔✔The speed selector is the preferred method to ______
______, _____, and _____ the movement.
couple - ✔✔Movement speed should be initiated by selecting _____ speed on the
speed selector lever
stop, neutral - ✔✔To apply 3 step protect on an RCL, speed selector lever is placed to
_____, and the Direction selector is placed to _____.
independent brake - ✔✔The ________ ________ override lever is used to apply air
brakes on the remote control locomotive consist.
emergency - ✔✔Except for the ______ position, the independent brake override
lever does not apply brakes on the freight cars.
low, 15 - ✔✔The _____ position of the independent brake override lever applies 33%
(_______ lbs) independent application and release brake pressure.
