CCNA Focused on Modules 4 & 7 Preparedness baseline Exam knowledge Questions with Expertly written solution 2024/2025
8 views 0 purchase
Course
CCNA - Cisco Certified Network Associate
Institution
CCNA - Cisco Certified Network Associate
CCNA Focused on Modules 4 & 7 Preparedness baseline Exam knowledge Questions with Expertly written solution 2024/2025
A Layer 2 switch is used to switch incoming frames from a 1000BASE-T port to a port connected to a 100Base-T network. Which method of memory buffering would work best for this ta...
A Layer 2 switch is used to switch incoming frames from a
1000BASE-T port to a port connected to a 100Base-T network.
Which method of memory buffering would work best for this
task?
- to obtain the MAC address of the sending node
- to verify the logical address of the sending node
- to compute the CRC header for the data field
- to determine if errors occurred in the transmission and
reception - correct answer to determine if errors occurred in
the transmission and reception
Which switching method has the lowest level of latency?
A network administrator is connecting two modern switches
using a straight-through cable. The switches are new and have
never been configured. Which three statements are correct about
the final result of the connection? (Choose three.)
, - The link between the switches will work at the fastest speed
that is supported by both switches.
- The link between switches will work as full-duplex.
- If both switches support different speeds, they will each work at
their own fastest speed.
- The auto-MDIX feature will configure the interfaces eliminating
the need for a crossover cable.
- The connection will not be possible unless the administrator
changes the cable to a crossover cable.
- The duplex capability has to be manually configured because it
cannot be negotiated. - correct answer - The link between the
switches will work at the fastest speed that is supported by both
switches.
- The link between switches will work as full-duplex.
- The auto-MDIX feature will configure the interfaces eliminating
the need for a crossover cable.
Which advantage does the store-and-forward switching method
have compared with the cut-through switching method?
- collision detecting
- frame error checking
- faster frame forwarding
- frame forwarding using IPv4 Layer 3 and 4 information -
correct answer frame error checking
When the store-and-forward method of switching is in use, what
part of the Ethernet frame is used to perform an error check?
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller KieranKent55. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.49. You're not tied to anything after your purchase.
