Exam (elaborations)
ASME Code with Over 50 Questions and Answers.
- Course
- Institution
ASME Code with Over 50 Questions and Answers.ASME Code with Over 50 Questions and Answers.
[Show more]
Content preview
ASME Code with Over 50 Questions andAnswers.
Name the 13 headings on the "operator's state log book." - Correct Answer Date, time,
continuous blow down setting, surface blow down valves opened, gauge glass blow
down, low water cutoff tested, safety valve manually tested, auxiliary equipment
checked, boiler ignition verified (on startup), boiler room cleaned, what was the internal
conditions observed when the boiler was opened, operator notes, signature and license
number of operator.
What is NBIC? - Correct Answer National board inspection code. The NBIC provides
standards for the installation, inspection, and repair and/or alteration of boilers, pressure
vessels, and pressure relief devices.
What is BPVC? - Correct Answer ASME's Boiler and Pressure Vessel Code.
What is section 7 "Care of Power Boilers?" - Correct Answer Provides guidelines to
assist those directly responsible for operating, maintaining, and examining power
boilers. Guidelines are also provided for operation of auxiliary equipment and
appliances that affect the safe and reliable operation of power boilers.
What is CMR? - Correct Answer Code of Massachusetts Regulations. Is the collection
of regulations promoted by various agencies of the commonwealth of Massachusetts? It
is the state counterpart to the national Code of Federal Regulation (CFR).
What is 310 CMR section 7? - Correct Answer Air pollution control.
What are the essential sections of 310 CMR? - Correct Answer 7.01: general
regulations to prevent air pollution.
7.02: emissions limitations list.
522 CMR: Board of Boiler Rules
What is Section 2.02 and what are the essentials? - Correct Answer 522 CMR 2.00:
Power Boilers
2.02: records.
To ensure the proper daily inspection of steam boilers, you should do this:
Part 1: When an engineer or fireman is operating steam boilers or steam engines, he or
she is actually engaged as an assistant to the person in charge, and during his or her
hours on duty, he or she is held responsible for the proper operation of the boilers and
engines specified and their appurtenances. Operators of steam boilers shall complete
and sign the Operator's Record Book, as provided for in M.G.L. c. 146, @ 46A, on a
daily basis.
, Part 2: All persons operating, repairing or maintaining these boilers, pressure vessels,
engines, and their appurtenances do so under the direct authority of the engineer in
charge. The engineer in charge will leave daily written instructions to the operating
personnel and those instructions will be made available to the District Engineering
Inspector upon rebut
522 CMR: Board of Boiler Rules
What is Section 2.03 and what are the essentials? - Correct Answer 522 CMR 2.00:
Power Boilers
Section 2.03: construction.
Manual devices and switches that allow the bypass of any safety control are prohibited
unless such device or switch is provided with a "dead-man" capability that ensures that
the operator is present and responsible when the device or switch is in use. No such
device or switch shall have the capability to fail in the closed position.
What is "dead-man capability?" - Correct Answer ensures that the operator is present
and responsible when the device or switch is in use. When the device or switch shall
have no capability to fail in the closed position.
522 CMR: Board of Boiler Rules
What is Section 2.06 and what are the essentials? - Correct Answer 522 CMR 2.00:
Power Boilers
Section 2.06: Inspection.
Field inspection: all high pressure/power boilers shall be thoroughly inspected internally
and externally while under pressure at least once annually in accordance with the 2015
NBIC.
According to ASME, boiler horsepower can be measured three ways. Tell me the three
ways and which section you can find it. - Correct Answer you can find it in 522 CMR:
Board of Boiler Rules, Section 2.06: Inspection or MGL Chapter 146 section 48.
Boiler horsepower can be calculated by using one of the following formulae:
1: the steam output capacity as listed on the manufacturer's tag divided by 34.5.
2: the BTU/hr. input listed on the manufacture's tag divided by 41,840.
3: the BTU/hr. output listed on the manufacturer's tag divided by 33,475.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Lectjoe. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $21.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
79064 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now