Rigger Safety Training
Course exam fully
solved & updated
2025
According to OSHA, slings used in a basket hitch shall have the loads_____
to prevent slippage. - answer Balanced
When slings encounter sharp edges on loads to be lifted, riggers shall
ensure that slings are: - answer protected or padded
According to ASME B30.9, what is the maximum width of an object that
can be placed in the eye of a wire rope sling? - answer ½ the length
According to OSHA, each day before being used, the sling and all
fastenings and attachments shall be inspected for damage or defects by a:
- answer competent person
According to OSHA, alloy steel chain slings, wire rope slings, metal mesh
slings and synthetic web slings shall not be used with loads in excess of
the_______of the slings. - answer rated capacity
According to OSHA, how many randomly distributed broken wires in one
rope lay must there be to remove the wire rope sling from service? -
answer ten
According to OSHA, how many broken wires in one strand in one rope lay
must there be to remove the rope from service? - answer Five
, According to OSHA, metal mesh slings shall be removed from service if
any of the following exists: - answer Broken weld lack of flexibility
distortion of the handles ALL OF THE ABOVE
According to OSHA, fiber rope slings shall be constructed using only what
type of fiber rope? - answer new fiber rope
According to OSHA, which of the conditions listed below will automatically
remove the synthetic web sling from service? - answer snags, punctures,
tears or cuts acid or caustic burns broken or worn stitches and distortion
ALL OF THE ABOVE
According to OSHA, quadruple sling bridle ratings are the same as: -
answer triple sling bridle ratings
According to ASME B30.10, markings shall be forged, cast or die stamped
on what area of the hook? - answer non-wearing
Referring to the rigger reference booklet, what is the capacity of a 7/8
inch grade 80 alloy chain sling using a vertical hitch? - answer 34,200 lbs.
According to ASME B30.10, any hook that has any visible bend or twist
from the plane of the unbent hook shall be? - answer repaired or replaced
According to ASME B30.10, any hook having distortion causing an increase
in throat opening of 5 percent , not to exceed 4 inch, shall be? - answer
replaced
According to ASME B30.10, any hook having wear exceeding _______ % shall
be removed from service. - answer 10%
According to OSHA, how often shall rigging used in material handling be
inspected? - answer prior to use each shift
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller GUARANTEEDSUCCESS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.99. You're not tied to anything after your purchase.