IEC YEAR 4 FINAL EXAM ACTUAL EXAM COMPLETE 1000+ QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED A+
14 views 0 purchase
Course
IEC YEAR 4
Institution
IEC YEAR 4
IEC YEAR 4 FINAL EXAM ACTUAL
EXAM COMPLETE 1000+ QUESTIONS
AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY
GRADED A+
Unless enclosed in an approved storage cabinet, not more than ___
gallons of flammable or combustible liquids are permitted to be stored
inside a room.
Select ...
IEC YEAR 4 FINAL EXAM ACTUAL
EXAM COMPLETE 1000+ QUESTIONS
AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY
GRADED A+
Unless enclosed in an approved storage cabinet, not more than ___
gallons of flammable or combustible liquids are permitted to be stored
inside a room.
Select one:
a.5
b.120
c.25
d.60
e.3 - ANS-c. 25
Outdoor storage tanks for flammable or combustible liquids shall be
kept at least ___ feet from a building.
Two switches in series can also be described as ___ in PLR
programming.
Select one:
,a.S1 AND S2
b.S1 OR S2
c.S1 WITH S2
d.S1 WITHOUT S2 - ANS-a. S1 AND S2
Two switches in parallel can also be described as ___ in PLR
programming.
Select one:
a.S1 AND S2
b.S1 OR S2
c.S1 WITH S2
d.S1 WITHOUT S2 - ANS-b. S1 OR S2
The force command is used primarily ___.
Select one:
a.as a troubleshooting tool
b.to disable a device
c.in normal operation - ANS-a. as a troubleshooting tool
The disable command is used primarily ___.
Select one:
a.to troubleshoot a system
b.in normal operation
c.to force a function - ANS-a. to troubleshoot a system
In PLR programming, "FBD" designates:
Select one:
a.Follow-up Being Done
b.First Block Done
, c.Function Block Diagram
d.Free By Design - ANS-c. Function Block Diagram
Which of the following is an example of discrete manufacturing?
Select one:
a.a furniture plant
b.a gravel pit
c.an oil refinery
d.a chemical blending facility - ANS-a. a furniture plant
The term for incident energy that results in sufficient heat transfer
through PPE to cause the onset of a second-degree burn in 6 cycles or
0.1 seconds is ___.
Select one:
a.arc rating
b.arc flash boundary
c.arc thermal performance value
d.arc flash - ANS-c. arc thermal performance value
NFPA 70E® uses the measurement of ___ in determining the arc flash
boundary.
The ___ boundary is the approach limit for unqualified individuals to
reduce the risk of contact with an exposed energized electrical
conductor or circuit part.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller joycewanjiku0036. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $17.99. You're not tied to anything after your purchase.