LLPSD FF1 Chapter 14 and 15 Questions With Solutions 100% Solved
3 views 0 purchase
Course
LLPSD
Institution
LLPSD
LLPSD FF1 Chapter 14 and 15 Questions With
Solutions 100% Solved
What is the minimum recommended pressure for water coming from a fire hydrant?
a. 30 psi
b. 40 psi
c. 50 psi
d. 20 psi 20
In a well-designed water distribution system, which type of pattern do the water mains follow?
a. loop
...
LLPSD FF1 Chapter 14 and 15 Questions With
Solutions 100% Solved
What is the minimum recommended pressure for water coming from a fire hydrant?
a. 30 psi
b. 40 psi
c. 50 psi
d. 20 psi 20
In a well-designed water distribution system, which type of pattern do the water mains follow?
a. loop
b. branched
c. parallel
d. grid d. grid
The two-fire-fighter stiff-arm method is used to _____.
a. reload LDH into a hose bed
b. make hard suction hose connections
c. uncouple hose
, LLPSD FF1 Chapter 14 and 15 Questions With
Solutions 100% Solved
d. advance a charged line c. uncouple hose
Which coupling goes on the inside of a straight hose roll?
a. either
b. both couplings are attached
c. female
d. male d. male
In general, mobile water supply apparatus carry ______.
a. 1ooo to 3500 gal.
b. 2000 to 5000 gal.
c. 3000 to 6000 gal.
d. 1000 or fewer gal. a. 1ooo to 3500 gal.
Which valve is opened or closed by rotating a handle a quarter turn?
a. Siamese
b. Butterfly
, LLPSD FF1 Chapter 14 and 15 Questions With
Solutions 100% Solved
c. Slide
d. Gate b. Butterfly
What is used to connect hose couplings with dissimilar threads?
a. Siamese
b. Adaptor
c. Fitting
d. Hose jacket b. Adaptor
Which term means the amount of energy in a body or stream of water?
a. flow
b. volume
c. watts
d. pressure d. pressure
A Pitot gauge is used to calculate ________ pressure.
a. flow
, LLPSD FF1 Chapter 14 and 15 Questions With
Solutions 100% Solved
b. operating
c. residual
d. static volume of flowing water
What is the fastest way for a mobile water supply apparatus to offload water into a portable tank?
a. use the dump valve
b. connect to the drafting pumper
c. use large-diameter hose
d. engage the tender's auxiliary pump a. use the dump valve
What is the last step in rolling a straight hose roll?
a. tie the slip knot
b. create a fold to protect the outer coupling
c. connect the couplings together
d. use a foot to align protruding hose d. use a foot to align protruding hose
Which pressure must be measured to calculate the quantity of water flowing through a hydrant
discharge
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller UpperClass. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $24.99. You're not tied to anything after your purchase.
