Exam (elaborations)
CBET Healthcare Technology Problem Solving Results| Questions and Verified Answers
- Course
- Institution
CBET Healthcare Technology Problem Solving Results| Questions and Verified Answers
[Show more]
Seller
Follow
Content preview
CBET Healthcare Technology ProblemSolving Results| Questions and Verified
Answers
B. 500 ohms - ✔The load impedance that would normally be used when checking
the output of an external cardiac pacemaker is
A. 50 ohms
B. 500 ohms
C. 50,000 ohms
D. 10,000,000 ohms
D. a non-continuous injection - ✔A thermal dilution cardiac output computer system
is indicating an error condition and the temperature recording curve shows a notch.
The problem was probably caused by
A. a defective cardiac output computer
B. an occluded catheter
C. interference from pacemaker pulses
D. a non-continuous injection
B. failure of lead wires, cable, or electrodes - ✔The most common type of
malfunction that occurs with bedside ECG patient monitoring equipment is
A. alarm circuits that fail to activate
, B. failure of lead wires, cable, or electrodes
C. high voltage breakdown in CRT circuits
D. cardiotach errors
D. location of the transducer relative to the patient's heart - ✔An invasive blood
pressure measurement shows negative pressures (<0mm-Hg) during a cardiac
catheterization, The staff reports no charge after replacing the transducer. When open
to atmosphere, the transducer reads 0 mm-Hg. You should now check the
A. size of the catheter
B. grounding of the invasive measuring devices
C. cable between the transducer an patient monitor
D. location of the transducer relative to the patient's heart
D. air bubbles are present in the pressure line - ✔A bedside monitor displays an
arterial blood pressure waveform that is damped and the readings are inaccurate. Of
the choices, the likely cause might be that
A. the catheter has migrated out of position
B. the equipment is not leveled, zero balanced or calibrated properly
C. insufficient time was allowed for equipment to warm-up
D. air bubble are present in the pressure line
B. defective galvanic cell - ✔An oxygen monitor has a very long response time to
room air. the most likely is a
A. defective PO2 electrode
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller KenAli. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.24. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
80467 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now
