100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
FOA CFOT CERTIFICATION EXAM V11| COMPLETE SOLUTIONS 100% CORRECT. $11.29   Add to cart

Exam (elaborations)

FOA CFOT CERTIFICATION EXAM V11| COMPLETE SOLUTIONS 100% CORRECT.

 6 views  0 purchase
  • Course
  • FOA CFOT.
  • Institution
  • FOA CFOT.

FOA CFOT CERTIFICATION EXAM V11| COMPLETE SOLUTIONS 100% CORRECT. A fiber optic inspection microscope can increase the danger of high powered light sources by focusing the light coming out of a fiber into your eye. True or False? - True A fiber optic power meter measures absolute power...

[Show more]

Preview 2 out of 6  pages

  • September 19, 2024
  • 6
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • FOA CFOT.
  • FOA CFOT.
avatar-seller
Mboffin
FOA CFOT CERTIFICATION EXAM V11| COMPLETE
SOLUTIONS 100% CORRECT.


A fiber optic inspection microscope can increase the danger of high powered light
sources by focusing the light coming out of a fiber into your eye. True or False? - True

A fiber optic power meter measures absolute power in dBM (dB referenced to 1 mw)
and, when used with a light source, can measure insertion loss expressed in dB. True
or False? - True

When we say 62.5/125 fiber, what does "62.5" mean? - core size, the diameter in
microns

When we say 50/125 fiber, what does "125" mean? - cladding size, the diameter in
microns

OM3 and OM4 multimode fiber with a 50/125 micron core are now a popular option in
premises cabling systems because they _____. - Are "laser optimized" which gives
more distance capability with gigabit networks using laser sources

In-multimode fiber, the attenuation (reduction in optical power) of the fiber is _____ at
850 nm than at 1300 nm. - Higher

Which of the following represents a singlemode (smaller core size) fiber size? - 9/125
micron

Singlemode fiber has _____ bandwidth than multimode fiber. - greater

Most plastic optical fibers are _____. - large core step-index

When you strip singlemode or graded index multimode mode glass fiber, you are
removing the ____. - Primary buffer coating

The proper method of pulling optical fiber cables is to attach the pull wire or tape to the
____ of the cable. - Strength members

According to the references, hybrid cables are cables that contain ____. - Both
singelmode and multimode optical fibers

What type of fiber cable design allows for large numbers of fibers with ultra-high density,
small size (diameter) and lower cost? - ribbon

, According to the references, composite cables refer to cables that contain ____> - both
optical fibers and copper conductors

Which optical fiber cables must be grounded? - all cables that contain metallic
elements

Fiber optic cable for use inside a building must _______. - Be rated to meet the
requirements of local building and fire codes

Optical fiber cable with a orange colored jacket generally indicates the cable contains
_____. - Multimode fiber

Premises cable jackets are usually color-coded in what color to indicate singlemode
fiber? - Yellow

Premises cable jackets are usually color-coded in what color to indicate laser-optimized
50/125 OM3 or OM4 fiber? - Aqua

When pulling long lengths of cable in conduit or innerduct, you may need to ____. - Any
or all of these as appropriate (Pull form the center to the ends, Use a breakaway swivel
or monitor tension, Lubricate the cable)

In a loose tube cable, a gel or absorbent tape or powder is normally used _____. - To
prevent water from entering the cable

Which type of cable is best suited for indoor installation when fibers ar to be directly
terminated inside a patch panel with adhesive/polish or prepolished splice connectors? -
tight buffer distribution cable

What type of cable may require installation of a breakout kit (also called a furcation or
fan out kit) for termination? - loose tube (loose buffer) cable

When pulling cables, the minimum bend radius under tension is generally specified as
______. - 20 times the cable diameter

Cable ties used on fiber optic cables ____. - Can harm cables if too tight, so they
should be hand-tightened.

Fiber optic joints (connectors or splices) should have ____. - low loss, minimal
reflectance and high mechanical strength

To reduce _____ as well as loss, the end of a connector ferrule is polished to a PC
(physical contact) finish. - Reflectance

Factory terminations, such as used for making patchcords, generally use what method
of attaching the connector? - Epoxy/polish

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Mboffin. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $11.29. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

80364 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$11.29
  • (0)
  Add to cart