1/4" Answer: Threads of drainage fittings shall be tapped as to allow _____ pitch per foot
4 lbs Answer: Lead used for safe pans shall not be less than ________ per square foot
Copper Tube, Cast Iron, Stainless steel, ABS, PVC DWV Answer: Name 3 allowable materials for the
DWV system "underground"
1-1/4" - 1 dfu's
1-1/2" - 3 dfu's
2" - 4 dfu's
3" 6 dfu's
4" - dfu's Answer: What are the fixture unit values for the following traps
Double fixture fitting Answer: What type of fitting is used for continuous waste and venting of
lavatories back to back?
1" Answer: Caulk joints for cast iron bell and spigot shall be filled with molten lead to a depth of not
less than ________?
Wye, Combination Wye w/ 1/8 bend, Long sweep Answer: What type of fitting or fittings can be
used to connect horizontal drainage to another horizontal drainage line?
- Each horizontal drainage pipe shall be provided with a cleat at its upper terminal
,- Horizontal run more than 100'
- Each horizontal change of direction exceeding 135°
- Front Main Cleanout Answer: Cleanout locations required by code
100' Answer: Maximum distance a cleanup can be spaced apart
12"
18" Answer: Minimum clearance in front of a cleanup for 2" or less
Minimum clearance in front of a cleanup for 2" or more
20' Answer: Underfloor cleanup shall not be located more than _____ from an access door, trap
door, or crawl hole
Back Water Valve Answer: When plumbing fixtures are installed on a floor level lower than the next
upstream manhole cover of the sewer, such drainage piping shall be protected from backflow of sewage
by a ____________
20 Answer: Sewage ejectors receiving the discharge of water closets or ruinals shall have a
discharge capacity not less than ___ gallons per minute
2" Answer: What is the minimum size discharge pipe for an ejector installed in a single dwelling?
2" Answer: The lowest inlet connected to the ejector pump shall have a clearance of not less than
____ from the high water or starting level of the sump.
Yes, with prior approval of the AHJ Answer: Can macerating toilet systems be installed instead of a
sewage pump system
, 3/4" Answer: What is the minimum size discharge pipe for a macerating toilet system
1/4" per foot Answer: What is the minimum pitch required fora 2" horizontal drain?
Swing check valve Answer: The discharge line from an ejector pump shall be provided with an
accessible ___________ and gate or ball valve.
Downstream of the backwater valve Answer: Where shall the gate valve be located on the discharge
line on an ejector pump
8' Answer: Drainage connections shall not be made into a drainage piping system within ________
of an vertical or horizontal change in direction of a stack containing suds producing fixtures.
10' Head of water for 15 minutes
5 psi for and air test Answer: What are the requirements when testing the DWV system Water and
Air?
When the dwelling is more than 200' away from the sewer. Answer: When is the public sewer
considered not being available?
2' away from the building Answer: At what point does the building sewer begin?
DFU's Answer: How is the size of the building sewer determined?
300' Answer: What is the maximum distance allowed between approved manholes?
12" Answer: When a water pipe and sewer pipe are placed in a common trench what is the
minimum distance above the top of the sewer line to the bottom of the water pipe?
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Schoolflix. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $14.99. You're not tied to anything after your purchase.