NCCCO TEST 2|| 50 QUESTIONS|| CORRECT ANSWERS|| LATEST UPDATE 2024
8 views 0 purchase
Course
NCCCO Crane
Institution
NCCCO Crane
When making a multiple crane lift, it is important for the operator to understand that: - ANSWER The weight may increase if the other crane lands the load
If a crane is not set-up level and the operator swings a load from the high side to the low side, the load radius will: - ANSWER Increase
...
NCCCO TEST 2|| 50 QUESTIONS||
CORRECT ANSWERS|| LATEST UPDATE
2024
When making a multiple crane lift, it is important for the operator to understand
that: - ANSWER The weight may increase if the other crane lands the load
If a crane is not set-up level and the operator swings a load from the high side to
the low side, the load radius will: - ANSWER Increase
Most crane manufacturers reduce load capacity for duty-cycle operations
because: - ANSWER Side loading forces may occur
On who's recommendations should a preventative maintenance program be set-
up? - ANSWER Crane manufacturer
What is the standard rope used on most cranes? - ANSWER Right regular lay
The proper way to calibrate a boom angle indicator is: - ANSWER Using a level,
raise the boom to horizontal and set the indicator at 0 degree.
The red area of an instrument gauge means: - ANSWER A dangerous condition
exists
, The best way to keep people from being injured from the counterweight of the
crane is to: - ANSWER Fence or barricade the swing area of the crane
Only approved attachments or extra counterweights made by the manufacturer
should be placed on the rear of the crane because: - ANSWER They could cause a
backward stability problem
What is the first thing an operator should do before going under a low pipe rack? -
ANSWER Post a signalperson to check clearance
When working on outriggers, the only time they should be less than fully
extended is when: - ANSWER There is a load chart for this operation
On the majority of conventional cranes, the power is transferred to the torque
converter by a: - ANSWER Master clutch
During disassembly of a long boom, the hog lines are connected at the maximum
cantilever point and the boom is slightly lifted off the ground. Which pins are to be
removed next? - ANSWER The bottom pins ahead of the cantilever point
When using load/capacity charts, what does the term 'A jib angle to ground' refer
to? - ANSWER Main boom angle minus the jibs offset
A truck crane, with outriggers properly set, is rated at what percentage of its
tipping capacity? - ANSWER 85%
On a truck crane with the outriggers extended and set, and tires touching the
ground, the operator should refer to what load chart? - ANSWER On rubber chart
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller shantelleG. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
