100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
2024 COMMERCIAL SEPTIC SYSTEM INSTALLER EXAM WITH CORRECT ANSWERS $14.99   Add to cart

Exam (elaborations)

2024 COMMERCIAL SEPTIC SYSTEM INSTALLER EXAM WITH CORRECT ANSWERS

 6 views  0 purchase
  • Course
  • COMMERCIAL SEPTIC SYSTEM INSTALLER
  • Institution
  • COMMERCIAL SEPTIC SYSTEM INSTALLER

2024 COMMERCIAL SEPTIC SYSTEM INSTALLER EXAM WITH CORRECT ANSWERS

Preview 2 out of 6  pages

  • September 25, 2024
  • 6
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • all tanks must have
  • total li
  • COMMERCIAL SEPTIC SYSTEM INSTALLER
  • COMMERCIAL SEPTIC SYSTEM INSTALLER
avatar-seller
Elitaa
2024 COMMERCIAL SEPTIC
SYSTEM INSTALLER EXAM WITH
CORRECT ANSWERS



All tanks must have: - CORRECT-ANSWERS2 compartments

All tanks whether pre-manufactured or constructed on site shall be
constructed so that the length is ___________ compared to the width. -
CORRECT-ANSWERSat least one and one- half (1 1/2) times... "to the width."

Septic Tanks may be made of: - CORRECT-ANSWERSConcrete, Plastic,
fiberglass, or other materials as approved by the department.

Total liquid depth for larger poured-in-place tanks shall have a maximum of
______________inches - CORRECT-ANSWERS66 inches

True or False: Walls and bottom of poured-in-place septic tanks must be
reinforced. - CORRECT-ANSWERSTrue

How can a Septic tank be reinforced? - CORRECT-ANSWERSsix inch by 6 inch
(6"x6") No.10 gage welded steel reinforcing wire OR fibrous reinforcing
material conforming to ASTM specifications for such materials.

How must Tank Lids be Reinforced? - CORRECT-ANSWERSusing three-eights
steel reinforcing rods (rebar) which shall be spaced twelve inches (12") on
center each way extending a minimum of two and one half (2 1/2") inches
and a maximum of three (3") from the outside edge of the tank lid.

In general, the tank must be able to withstand a uniform live load of
______________________ pounds per square foot in addition to all loads to which
an underground tank is normally subjected. - CORRECT-ANSWERS150

True or False: Walls, bottoms, and lids of poured-in-place septic tanks should
have a minimum thickness of four inches (4"). - CORRECT-ANSWERSTrue

Tank lids shall be constructed in ______________________ pieces and shall have
securable, removable access openings located so that the inlet and outlet

, tees can be ________________________________. - CORRECT-ANSWERSone or
two,
readily accessed.

Access opening shall have a minimum of _________________ and maximum of
___________________ free space. - CORRECT-ANSWERSMinimum: 15"
Maximum: 24"

Tanks with more than 12 inches of cover must extend access openings to
within ______ inches of the ground surface. - CORRECT-ANSWERS12

All tanks shall be equipped with ________________________________ rated or
equivalent tees at the inlet and outlet ends of the tank. - CORRECT-
ANSWERSFour inch (4") PVC, ASTM 3034

Tees shall be constructed so they extend into the liquid a minimum of
____________________ and a maximum of __________________ of the liquid depth
of the tank. - CORRECT-ANSWERSMin: 25%
Max: 50%

The invert of the outlet tee shall be located _______________ inches below the
invert of the inlet tee. - CORRECT-ANSWERStwo inches

__________________ tees shall be equipped with an approved effluent filter. -
CORRECT-ANSWERSOutlet

Concrete used for poured-in-place or pre-cast septic tanks shall have a
minimum ________________________. - CORRECT-ANSWERS28 day compressive
strength of 4000 pounds per square inch.

When pouring concrete, care should be taken to assure such operations are
not done during freezing or other wise inclement periods because
_________________________________. - CORRECT-ANSWERSit could damage the
integrity of the finished product.

the finished poured concrete product should have what texture and finish? -
CORRECT-ANSWERSsmooth homogeneous consistency and finish.

True of False: Vibrating the forms or mix may be helpful in eliminating
"honey combing" or "bridging" in the finished product. - CORRECT-
ANSWERSTrue

Who's responsibility is it to assure the quality of the finished product? -
CORRECT-ANSWERSThe on-site sewage contractor.

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Elitaa. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $14.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

80189 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$14.99
  • (0)
  Add to cart