RAC 40 Quiz 7 Review | Latest Update |
2024/2025 | 100% Verified
What is the key difference between soldering and brazing?
Soldering occurs below 840°F, while brazing takes place at temperatures above 840°F.
Why is flux used in both soldering and brazing?
Flux removes oxides from the...
RAC 40 Quiz 7 Review | Latest Update |
2024/2025 | 100% Verified
What is the key difference between soldering and brazing?
✔✔ Soldering occurs below 840°F, while brazing takes place at temperatures above 840°F.
Why is flux used in both soldering and brazing?
✔✔ Flux removes oxides from the metal surface and prevents further oxidation during the
heating process.
What is the purpose of capillary action in brazing?
✔✔ Capillary action draws the molten filler material into the joint between two metals.
Why is it important to clean metal surfaces before soldering or brazing?
✔✔ Cleaning ensures that there are no contaminants that could interfere with bonding or cause
weak joints.
Which type of filler metal is commonly used in soldering?
1
,✔✔ Tin-lead alloy is commonly used as a soldering filler material, though lead-free solders are
becoming more prevalent.
What is one advantage of brazing over welding?
✔✔ Brazing allows joining of dissimilar metals without melting the base materials.
How does the joint strength compare between soldering and brazing?
✔✔ Brazed joints are stronger than soldered joints due to the higher temperature and stronger
bond.
What is the most common method used to heat materials for brazing?
✔✔ Torch heating is the most common method used in brazing.
Why is it essential to avoid overheating during soldering?
✔✔ Overheating can cause the solder to burn or damage the components, leading to poor joint
quality.
In what situation would you use silver solder?
2
, ✔✔ Silver solder is used when a higher strength bond is needed, particularly for high-
temperature applications.
What happens if the gap between parts is too wide in brazing?
✔✔ If the gap is too wide, capillary action may fail, resulting in a weak joint.
What is the purpose of post-brazing cleaning?
✔✔ Post-brazing cleaning removes residual flux and oxides to prevent corrosion and improve
the joint's appearance.
Why are low-temperature solders typically used for electronics?
✔✔ Low-temperature solders minimize the risk of damaging sensitive electronic components.
What is the typical melting point range of solder used in plumbing?
✔✔ The typical melting point range of plumbing solder is 361°F to 500°F.
How does a flux-cored solder differ from a solid-core solder?
3
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller SterlingScores. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.70. You're not tied to anything after your purchase.
