Exam (elaborations)
Test Bank For Machine Tool Practices 11th Edition All Chapters - 9780137409129
- Course
- Institution
Test Bank For Machine Tool Practices 11th Edition All Chapters
[Show more]
Seller
Follow
Content preview
,TestBank For Machine Tool Practices 11th EditionSection A - Introduction
Section A - Introduction
1) An apprentice machinist learns the trade by entering a formal training program sponsored by
private company, trade union, or government entity.
Answer: TRUE
2) After completing an apprenticeship and apprentice is then called an indentured machinist.
Answer: FALSE
3) Shops that do not produce parts for other companies are called job shops.
Answer: FALSE
4) A process plan details all of the things that need to be done to manufacture a part.
Answer: TRUE
5) Process plans can also called routings or routers.
Answer: TRUE
6) If a person has 10 years of experience and trained at least 3 years under s master machinist
they are given the title of journeyman machinist.
Answer: FALSE
7) A Tool & Die apprenticeship is usually 5 years.
Answer: TRUE
8) Job shops do not normally have their own products.
Answer: TRUE
9) What is TPS?
A) Total Product Solution
B) Total Production System
C) Total Productivity System
D) Toyota Production System
Answer: D
10) Lean manufacturing is concerned with producing the product with fewer resources.
Answer: TRUE
11) Overproduction is defined as making a product before it is actually required.
Answer: TRUE
12) Polka-Yolk is a Japanese word that means mistake-proofing or fail-safe.
Answer: FALSE
1
,TestBank For Machine Tool Practices 11th Edition
Section A - Introduction
13) Transporting products between processes is a cost that does not add any value to the product.
Answer: TRUE
14) The term Five S comes from the Japanese.
Answer: TRUE
15) Poka-Yoke uses the rate of demand to control the rate of production.
Answer: FALSE
16) Kanban is a Japanese word that means mistake-proofing or fail-safe.
Answer: FALSE
17) Kanban is not an inventory control system. It is a scheduling system that helps determine
what to produce, when to produce it, and how many to produce.
Answer: TRUE
18) Proper dress includes:
A) Short hair and short sleeve shirt
B) Solid shoes, short or secured hair and a short sleeve shirt
C) Any shoes, short hair and short sleeves
D) Solid shoes and a shop coat
Answer: B
19) A ________ contains information about the properties of particular chemicals, materials, and
other substances.
Answer: Material Safety Data Sheet
20) Compressed air may:
A) Injure skin
B) Cause metal chips to fly
C) Injure ears
D) Cause all of the above
Answer: D
21) Grinder operations require that:
A) Side shield safety glasses be worn
B) Dust must be controlled
C) Plain safety glasses be worn and dust controlled
D) Side shield safety glasses be worn and dust controlled
Answer: D
22) To protect hands:
A) Keep them out of danger by thinking about safety
B) Wear gloves
C) Clean chips with a brush instead of hands
D) Both A and C
2
, TestBank For Machine Tool Practices 11th Edition
Section A - Introduction
Answer: D
23) Grinding dust can:
A) Be extremely fine metal particles
B) Be controlled using coolants
C) Be a hazard to health
D) All of the above
Answer: D
24) Gloves should be worn when cutting hot chips.
Answer: FALSE
25) Safety is:
A) Something that pertains only to being inside the machine shop
B) An attitude that should be considered in everything you do
C) Really only important to beginners
D) Something that pertains only to machine tool operations
Answer: B
26) When cleaning a machine tool after use:
A) Use a brush to remove chips from the machine
B) Blow chips with compressed air as long as the air pressure is not over 10 PSI
C) Wash the entire machine with a non-flammable cleaning solvent
D) Use a rag to remove chips from the machine
Answer: A
27) The right way (position) to lift is:
A) Lean over the load and lift it slightly to see how heavy it is
B) Weigh the load to see if it is over 57 pounds
C) Size up the load to determine if it is within your lifting capacity
D) Keep the back straight, bend knees and squat down
Answer: D
28) You are going to do maintenance on a permanently wired machine tool. You should first:
A) Have another person stand by the machine while you work
B) Switch off the circuit breaker to the machine, tag and/or lock out the switch with an
appropriate tag and lock
C) Call an electrician to disconnect the machine wiring
D) Turn the machine switch to off
Answer: B
29) ________ procedures are intended to protect workers when machine maintenance is
performed.
Answer: Lockout Tagout
3
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller meilleurellamae373090. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $49.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
85443 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now