Exam (elaborations)
Alabama Contractors License Practice Exam
- Course
- Institution
Alabama Contractors License Practice Exam
[Show more]
Content preview
Alabama Contractors License Practice Exam(1/175) - ANSWER-Framing members for each individual pane of glass must have a
deflection of less than____ of the glass edge length.
A. (1/100)
B. (1/150)
C. (1/175)
D. (1/200)
(3/8) - ANSWER-For damp proofing, masonry walls shall not have less than ____inches
of Portland cement parging applied to the exterior of the wall.
A. (1/4)
B. (1/2)
C. (3/4)
D. (3/8)
(7/16) - ANSWER-On a steel wall, OSB structural sheathing materials shall be a
minimum of____inches thick.
A. (3/8)
B. (7/16)
C. (3/4)
D. (1/2)
#5 - ANSWER-What is the minimum reinforcing bar size for an 8-inch stacked bonded
masonry wall?
A. #3
B. #4
C. #5
D. #6
$100,000 - ANSWER-Projects worth how much require bonds under the Miller Act?
A. $100,000
B. $110,000
C. $25,000
D. $50,000
0.019 - ANSWER-Roof flashing shall have a minimum thickness of ____inches.
A. 0.015
B. 0.019
,C. 0.025
D. 0.030
0.0428 - ANSWER-What is the minimum base steel thickness for a 43 mil structural
steel member?
A. 0.0329
B. 0.0538
C. 0.0428
D. 0.0966
0.2 - ANSWER-What is the equivalent opening factor for a 1000-degree Fahrenheit
exposed surface for 1 hour?
A. 0.1
B. 0.2
C. 0.3
D. 0.5
0.6 - ANSWER-A curtain wall located in Climate Zone 3 Requires a U-factor of?
A. 0.5
B. 0.6
C. 0.7
D. 1.2
1 - ANSWER-A drill hole for piping or conduit shall be a minimum of___inches from the
top and bottom to the floor joist.
A. 1
B. 2
C. 3
D. 4
1 - ANSWER-How many egress doors must be provided for each dwelling unit?
A. 1
B. 2
C. 3
D. 4
1 - ANSWER-Parapet walls should be coped with materials with a minimum width of
____ times the thickness of the wall.
A. 1
B. 1.5
,C. 2
D. 2.5
1 - ANSWER-Ventilation openings are not required where mechanical ventilation is
provided continuously at ____cubic feet per minute.
A. 1
B. 2
C. 3
D. 4
1 ft - ANSWER-What is the minimum depth to which exterior footings must be placed?
A. 1 ft
B. 2 ft
C. 3 ft
D. 4 ft
1.5 - ANSWER-What is the structural safety factor for mullions?
A. 1.5
B. 2
C. 2.5
D. 3
1.5 - ANSWER-What safety factor is used in the design of retaining walls?
A. 1.5
B. 2.5
C. 3
D. 3.5
10 - ANSWER-Steel roof trusses shall be connected to a load-bearing wall with
No.____ screws.
A. 8
B. 10
C. 12
D. 15
10,000 - ANSWER-Electrical equipment intended to interrupt current at fault levels shall
have a minimum interrupting rating of ____ amperes.
A. 1
B. 5,000
C. 10,000
, D. 15,000
100 - ANSWER-Hot weather construction provisions for masonry should be applied
when the temperature exceeds____degrees Fahrenheit.
A. 85
B. 90
C. 95
D. 100
12 - ANSWER-Plumbing fixtures with concealed slip joint connections must have an
access panel at least ____inches in diameter.
A. 12
B. 18
C. 24
D. 36
12 - ANSWER-Pools heated to more than 90 degrees F shall have a pool cover with a
minimum R-value of?
A. 8
B. 10
C. 12
D. 14
12 - ANSWER-Stumps and roots must be removed to a depth of ____inches below the
surface of the ground in the area occupied by the building.
A. 6
B. 12
C. 18
D. 24
12 in - ANSWER-What is the minimum size of a footing of a two-story light-frame
construction home on soil with a load bearing value of 2,000 psf?
A. 12 in
B. 15 in
C. 17 in
D. 23 in
12 to 1 - ANSWER-What is the maximum slope of a ramp?
A. 4 to 1
B. 8 to 1
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LUCKYSTAR2022. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
76799 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now