Exam (elaborations)
Mass 1A Hoisting Study Guide Questions and Answers Fully Solved
- Course
- Institution
Mass 1A Hoisting Study Guide
[Show more]
Content preview
Mass 1A Hoisting Study GuideWhere should a license or temporary permit be located during time of operation of
equipment - answerShall be carried ON the person at all times; in the case of a
temporary permit the person shall also carry their drivers license
Whats the fine for violating section 53, 53a or 54 - answerNo less than $500 and no
more than $3,000, or by imprisonment of no more than 3 months, or both fine and
imprisonment
Whats the fine for permitting an unlicensed person to operate machinery - answerNo
less than $1,000 and no more than $3,000, or imprisonment of no more than 3 months,
or both fine and imprisonment
Whats the fine for violating section 42 to 51, or prevents an inspector from entering the
premises - answerNo less than $10 no more than $300, or by imprisonment of upto 3
months
Whats the purpose of 520CMR 6.00 - answerTo establish reasonable requirements to
protect the public safety of the citizens of the commonwealth from the hazards inherent
in the operation of housting machinery by establishing min standards neccessary to
obtain a hoisting machinery operators license or temp permit
ANSI - answerAmerican National Standards Institute
Apprentice license - answerA document issued by the dept upon proof of registratio at a
training facility and with the division of apprentice training within the dept of labor
standards, which enables the holder to operate hoisting machinery under the direct
guidance and supervision of a duly licensed person licensed to operate the category of
hoisting machinery for which documentation is issued
ASME - answerAmerican Society of Mechanical Engineers
cargo - answerA load, quantity or volume that can be processed or transported
Apprentice licensee - answerA person, 18 or older, registered with the dept of labor
standards and has obtained an apprentice license to operate while under direct
guidance and supervision of a duly licensed person
Chief - answerThe chief of inspections-mechanical of the dept of public safety
,Compact hoisting machinery - answerMachinery wirh a gross vehicle weight not
exceeding 10,000 lbs, excluding Class 1, Class 3 and Class 4 hoisting machinery as
listed in 520CMR 6.10. Machinery operated under temp permit may not exceed
8,000lbs
DAT - answerDivision of Apprentice Training
Department - answerDept of Public Safety
DOT - answerDepartment of Transportation
Emergency procedure - answerActions required to be taken when imminent danger may
occur to prevent damage to life, property, or to public safety
Company license - answerIssued by an exempt company that has a dept approved in
service training program and is only valid for machinery used on company property
fork lift - answerAny mobile powered truck used to carry, push, lift, stack or tier
materials, EXCLUDING earth moving, over the road haulage trucks and equipment
which was designed to move earth but modified to accept forks
Hoisting machinery - answerDerricks, cableways, machinery used for discharging
cargoes, and temp elevator cars used on excavation work or hoisting building materials,
when the motive power to operate such machinery is mechanical and other than steam,
and any other equipment that has the MIN capability of hoisting a load HIGHER THAN
10 FT, and either the capability of lifting loads GREATER THAN 500 LBS or the
capacity of the bucket EXCEEDS 1/4 CUBIC YARDS; overhead bridge cranes, electric
or air driven hoists, specialty equipment as catagorized under 520CMR 6.00
incedent - answerA situation that results in serious injury, property damage or any
condition that is necessary for the preservation of the public health or safety
Injury and incedent documentation - answerA form furnished by the department
detailing all specific info regarding any serious injury, property damage or mechanical
failure that may have occurred
inspector - answerA District Engineering Inspector employed by the Department
Manufacturer approved attachment - answerAttachable equipment tailored to perform a
particular task, designed or approved for use in accordance with the equipment
manufacturers spec's. If the manufacturer doesnt exist, a MASS registered professional
engineer shall review and approve in writing the actions and reasons for said specs to
the attachable equipment
, mechanical failure - answerDamage to or breakdown of hoisting machinery which
affects the capacity or safe operation of the equipment per the manufacturers
specifications
1% - answerIf a crane is out of level by 1%, you can lose upto 50% capacity
3300 pounds - answerPounds weight of one cubic yard of soil
125 pounds - answerWeight of one cubic foot of soil
operator's manual - answerThe document created by the manufacturer of the hoisting
equip. That contains the required procedures and forms for the safe operatiob of
hoisting machinery ar the stated site pertaining to that spec. Equip.
placard - answerA dept issued certificate posted on machinery which acts as a notice of
the unsafe conditiob of the machinery
Property Damage - answerDamage of private or public property that exceeds $5,000
per incident
qualified welder - answerA welder certified by the American Welding Society (AWS)
SAE - answerSociety of Automotive Engineers
serious injury - answerA personal injury/illness that results in
death,dismemberment,significant disfigurement, permanant loss of the use of a body
organ,member,functiob or system, a compound fracture or other significant injury/illness
Signal Person - answerA trained individual qualified in the use of signals to direct the
operator of hoisting equipment or warn of possible or existing hazards through the use
of hand signals,audible signals or flashing lights (see 520 CMR 6.00 apx A)
Temporary Permit - answerNon-renewable permit to operate machinery, with a gross
vehicle weight not exceeding 8,000 lbs issued by dept approved short term rental entity
for no more than 14 consec. Days
Temp permit holder - answerPerson who is 18 or older, holds a valid drivers license and
has obtained a temp permit.
Utility - answerAny organization or company that provides electricity, natural gas, phone
or cable services to public
Ansi standards for operating - answerB30.2-2011 overhead or Gantry Cranes
(Top running bridge, single or mult girder, top running trolly hoist)
B30.3-2012 tower cranes
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller julianah420. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
81311 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now