AUTOMOTIVE COLLISION REPAIR -SEMESTER 1
FINAL EXAM ACTUAL EXAM COMPLETE
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+||BRAND NEW!!.
The higher the thread pitch number on a metric fastener the:✔✔
ANSWER✔✔coarser the thread.
A left-hand threaded fastener is:✔✔ ANSWER✔✔used on rotating
parts.
A flat washer is used to:✔✔ ANSWER✔✔reduce stress.
Snap rings would most likely be used on:✔✔ ANSWER✔✔an axle shaft.
A gap is the _______________ of the opening between panels.✔✔
ANSWER✔✔width
Flushness is the difference in _______________ between two
panels.✔✔ ANSWER✔✔height
,_______________ flushness from the fender to door would mean that
the fender is sticking out from the door.✔✔ ANSWER✔✔Positive
Negative flushness from the fender to the door would mean that the
fender is _______________from the door.✔✔ ANSWER✔✔Inward
If there is no vehicle maker recommendation for panel gaps or
flushness, compare the panels to the _______________ side of the
vehicle.✔✔ ANSWER✔✔opposite
0/6
If the _______________ is not dimensionally correct, it will be difficult
or impossible to achieve correct panel alignment.✔✔
ANSWER✔✔structure
0/6
If a bolted radiator core support is misaligned on a _______________-
_______________-_______________ vehicle, it may give the
appearancethat the fender and hood are misaligned, but the hood to
cowl is properly aligned.✔✔ ANSWER✔✔Body-over-frame
Some of the different types of adjustments for bolted exterior panels
include slotted or elongated _______________, threaded mounting
plates, adjustable stops, and the use of shims.✔✔ ANSWER✔✔holes
,To align mechanically attached exterior panels, start with the panel
closest to an _______________ welded panel when adjusting multiple
panels.✔✔ ANSWER✔✔undamaged
When checking the opening and closing effort on a door, watch for the
door dropping down or jumping up off of the _______________.✔✔
ANSWER✔✔striker
Before beginning repairs, determine if there are any _______________
adjacent panels that require complete or partial removal.✔✔
ANSWER✔✔undamaged
Adjacent panel edges should be masked to avoid _______________
during part removal and installation.✔✔ ANSWER✔✔damage
Verify the proper part by comparing the replacement part with the
damaged part for the same design and _______________ locations.✔✔
ANSWER✔✔mounting
An _______________ may be required for removal and installation of
some parts to avoid damaging adjacent panels and glass.✔✔
ANSWER✔✔assistant
Hinges used to fasten movable exterior body panels to the body
structure may have _______________ pins and bushings and
, _______________ that cannot be replaced.✔✔ ANSWER✔✔rivets and
replaceable
When the door pins and bushings need to be replaced, the panel will
usually _______________ off of the striker.✔✔ ANSWER✔✔drop
Damage may be hidden behind the _______________ or bumper
cover.✔✔ ANSWER✔✔fascia
Bumper __________________ can be made of ultra-high-strength steel,
aluminum, or a reinforced composite.✔✔ ANSWER✔✔reinforcements
Bumper _______________ are used to attach the bumper to the frame
or unibody structure✔✔ ANSWER✔✔brackets
There are three types of labels commonly used for identifying
hazardous materials. These labels include supplier, _______________,
and other means of identification.✔✔ ANSWER✔✔workplace
If there is a container without a label you should____________.✔✔
ANSWER✔✔do not use it until find out what the material is.
The product identifier; identifies the ____________.✔✔
ANSWER✔✔hazardous material
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller teachme2expert. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $15.99. You're not tied to anything after your purchase.
