Exam (elaborations)
ASE Auto Collision Repair Exam with correct answers
- Course
- Institution
ASE Auto Collision Repair Exam with correct answers
[Show more]
Seller
Follow
Content preview
ASE Auto Collision Repair Exam withcorrect answers
A dent in an aluminum panel is being repaired. Technician A says that applying heat will help the
aluminum return to its undamaged state. Technician B says that non-contact thermometer can be used
to detect the temperature of the aluminum. Who is right? - correct answer -Both Technicians A and B
A panel is being prepared for MIG welding. Technician A says to remove all coating, paints and primers
from the weld area. Technician B says not to remove the galvanized coating. Who is right? - correct
answer -Both Technicians A and B
When removing a door skin, Technician A says a cutting torch should be used to separate the welded
door skin from the door skin hem flange. Technician B says a grinder should be used to grind away the
edge of the door skin. Who is right? - correct answer -Technician B only
Technician A says that the hammer-off-dolly method will stretch the metal. Technician B says that the
hammer-on-dolly method will stretch the metal. Who is right? - correct answer -Technician B only
Technician A says that because we cannot know where the High Strength Steel is located on the vehicle,
all sheet metal should be treated as HHS. Technician B says the body repair manual will sometimes
identify those parts that are made of HHS. Who is right? - correct answer -Both Technicians A and B
A technician complains of seeing white spots after welding. Technician A says to use a lower number
shade lens. Technician B says to use a higher number shade lens. Who is right? - correct answer -
Technician B only
A long weld is to be made. After tacking the pieces together, technician A says to complete the weld
using a skip weld technique by starting in the middle of the joint and working outwards in both
directions, alternating welds. Technician B says to set the machine on the pulse setting and complete the
weld by welding on the pulse setting in a single direction. Who is right? - correct answer -Both
Technicians A and B
Technician A says that the burn test can be used to identify plastic. Technician B says that the burn test
creates toxic fumes. Who is correct? - correct answer -Technician B only
, Technician A says that with the tack welding tip in place on the hot air welder, a welding rod is not
necessary to tack weld plastic parts. Technician B says that a plastic welding rod may be required. Who
is right? - correct answer -Technician A only
Technician A says that most thermosetting plastics can be fusion welded. Technician B says that
thermoplastics can be fusion welded. Who is right? - correct answer -Technician B only
When performing an adhesive plastic repair, technician A says an adhesion promoter is necessary if the
base plastic is ground and it melts and smears. Technician B says the adhesion promoter is required on
plastics that do not melt and smear when ground. Who is right? - correct answer -Technician A only
Technician A says that TPO plastics can be repaired using the airless plastic welder. Technician B says
that TPO plastics can be repaired using adhesives. Who is right? - correct answer -Both Technicians A
and B
Rough cutting can be done with the oxyacetylene torch if enough room is left to trim the heat-affected
area. How much room is needed.
A: 1/2 inch
B: 2 inches
C: 4 inches
D: 6 inches - correct answer -C: 4 inches
An insurance appraiser writes an estimate on the repair of a door indicating the replacement of the
outer panel and a repair to the door frame. Once the outer door skin is removed, the technician
discovers damage to the intrusion beam. Technician A says the repair to the beam is included in the
provision for the repair of the door frame. Technician B says it is not, and a separate procedure and line
item on the bill is called for. Who is right? - correct answer -Neither Technician A nor B
A car is brought into the shop after an authorization to commence work is obtained from the customer.
Having been stored outside for weeks and being covered with bird droppings, technician A says the car
needs to be washed with a solvent prior to commencing work. Technician B says the car needs a wash
with water and detergent first. Who is right? - correct answer -Technician B only
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Lectphilip. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
81311 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now