100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Basic Wastewater Operator Practice Exam|125 Complete Q’s and A’s $16.49   Add to cart

Exam (elaborations)

Basic Wastewater Operator Practice Exam|125 Complete Q’s and A’s

 6 views  0 purchase
  • Course
  • Institution

Basic Wastewater Operator Practice Exam|125 Complete Q’s and A’s

Preview 3 out of 22  pages

  • October 22, 2024
  • 22
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
avatar-seller
Basic Wastewater Operator Practice
Exam|125 Complete Q’s and A’s
What is the predominant organism in a healthy activated sludge treatment
plant?

A. Stalked ciliates
B. rotifers
C. nematodes
D. amoebas - -A. Stalked Ciliates

-A composite sample must be?

A. sporadically collected in the treatment plant
B. taken at one time
C. analyzed immediately
D. representative and sub-samples time spaced over 15 minutes apart - -D.
representative and sub-samples time spaced over 15 minutes apart

-What is the standard volume for a BOD sample bottle?

A. 150 mL
B. 200 mL
C. 300 mL
D. 500 mL - -c. 300 mL

-If you have a lime slurry feed line, what is the best valve to use?

A. plug valve
B. butterfly valve
C. RPZ dual check valve
D. gate valve - -A. plug valve

-5. If you notice a predominance of rotifers in your activated sludge sample
while looking at it under a microscope, what does this indicate?

A. healthy sludge
B. young sludge
C. old sludge
D. middle age sludge - -C. old sludge

-Calculate the BOD using the given information:
Initial DO: 8.3
Final DO: 5.9

,Milliliters of sample used: 2

a. 360 mg/L
b. 210 mg/L
c. 856 mg/L
d. 36 mg/L - -a. 360 mg/L

-If your activated sludge plant begins to nitrify, what conditions would you
expect to decrease?

A. settling in clarifiers
B. chlorine demand
C. BOD effluent
D. TSS in effluent - -a. settling in the clarifiers

-How do you calibrate a chemical feed pump?

A. by measuring the pump output
B. using the SWAG method
C. jar test
D. with a microscope - -A. by measuring the pump output

-What is the chemical formula for sulfuric acid?

a. HNO3
b. HCl
c. NaOH
d. H2SO4 - -d. H2SO4

-What is the most common type of activated sludge package plants?

a. extended aeration
b. sequential batch reactor
c. oxidation ditch
d. bardenpho - -a. extended aeration

-What is the most appropriate method of reducing the F:M ratio?

A. increase wasting
b. decrease wasting
c. reduce BOD from influent flow
D. add polymer to RAS to increase settling - -b. decrease wasting

-An operator notices a portion of the aeration tank with large bubbles rising
up. What is the most likely problem?

, a. equal air distribution
b. unequal air distribution caused by a blown/clogged diffuser
c. normal operation
d. reason to believe the air filter in the blower is clogged - -b. unequal air
distribution caused by a blown diffuser

-What is suction lift?

a. a team approach to lifting heavy objects
b. the pressure on the suction side of the pump
c. the measurement of liquid pressure at the pump
d. the measure of how bad your workers lift heavy objects - -b. the pressure
on the suction side of the pump

-The primary effluent to a RBC system is 350 mg/L BOD. The primary unit
removes 83% the secondary unit removes 50% and the final unit removes
25%. What is the BOD leaving the final unit of the RBC train?

A. 290 mg/L
b. 60 mg/L
c. 30 mg/L
d. 22.5 mg/L - -d. 22.5 mg/L

-The influent to the treatment plant is septic. it is determined that it is
coming from a lift station upstream from the plant. What should the operator
do?

A. decrease the lag time for pump operation by moving the floats closer
together
b. add pH adjuster to the influent flow
c. install larger capacity pumps in the lift stations
d. the her nothing you can do to correct this problem - -A. decrease the lag
time for pump operation by moving the floats closer together

-What is the purpose of amber storage bottles?

A. the color is pretty
b. they are cheaper
c. to protect chemicals that are sensitive to light
d. so you can not see what is inside the container - -c. to protect chemicals
that are sensitive to light

-Calculate SRT
Given: MLSS = 2400 mg/L
Aeration basin volume = 35,000 gallons = 0.0350 MG
WAS concentration = 3500 mg/L

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Victorious23. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $16.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

75759 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$16.49
  • (0)
  Add to cart