ARDMS SPI ACTUAL FINAL EXAM
2025|(200+)Brand new Exam Questions And
Correct Answers All Graded A+|Guaranteed
Success|Latest Update 2024-2025
Which gain will increase the risk of bioeffects?
a. transmit
b. receive
c. gain
d. overall gain - ANSWER-✅a. transmit
Which of the following is considered the memory of an ultrasound instrument?
a. pulser
b. transducer
c. receiver
d. beam former
e. digital scan converter
f. display monitor - ANSWER-✅e. digital scan converter
Spectral broadening suggest:
a. laminar flow
b. turbulent flow
c. flow away from the transducer
d. flow towards the transducer - ANSWER-✅b. turbulent flow
With pulse wave Doppler axial resolution: - ANSWER-✅degrades
What color is usually use in color flow Doppler variance map to indicate turbulent
flow? - ANSWER-✅green
Doppler high pass filter eliminates: - ANSWER-✅high amplitude signals; low velocity
flow
The Doppler wall filter is considered a: - ANSWER-✅high pass filter
The Nyquist Limit is equal to:
a. propagation speed x frequency
b. propagation speed/ wavelength
c. PRF/2
,d. 4xV^2 - ANSWER-✅c. PRF/2
Multiple echoes, equally spaced originating from a gas bubble is called:
a. comet tail
b. ring down
c. slice thickness artifact
d. multipath - ANSWER-✅b. ring down
An increase in red blood cell velocity will_____ the Doppler Shift:
a. increase
b. decrease
c. not change
d. cannot be predicted - ANSWER-✅a. increase
The primary advantage of CW Doppler is:
a. range resolution
b. range discrimination
c. range ambiguity
d. range gating
e. absence of sampling rate - ANSWER-✅e. absence of sampling rate
The range for ultrasound begins:
a. 20 Hz
b. 20,000 Hz
c. 2 MHz
d. 15 MHz - ANSWER-✅b. 20,000 Hz (useful frequency range for clinical imaging is
2MHz-10MHz)
Which instrument control affects the amplitude (dB) of the outgoing signal:
a. gain
b. receiver gain
c. TGC
d. transmit gain
e. overall gain - ANSWER-✅d. transmit gain; amplitude can be affected by the
sonographer
Which of the following is used to convert Doppler shift information into color:
a. high PRF
b. fast Fourier transform
c. autocorrelation
d. time interval histogram - ANSWER-✅c. autocorrelation
b is incorrect because fast Fourier transform is the method used to process
conventional Doppler shift information but is too slow a method for color Doppler
Pulse repetition frequency - ANSWER-✅Number of pulses that an ultrasound
system transmits into the body each second. Hz. Typically 4-15 KHz. PRF and depth
, of a view are inversely related: When system is imaging deeper, the pulse repetition
frequency is lower.
Also the number of pulses created each second
The best way to increase the near field length of an ultrasound beam is to: -
ANSWER-✅increase transducer diameter
The range of frequencies produced by a damped PZT element is called:
a. fundamental frequencies
b. Q Factor
c. near field
d. bandwith - ANSWER-✅d. bandwidth
The percentage of time that the ultrasound instrument is emitting ultrasound is
called:
a. PRF
b. pulse duration
c. pulse repetition period
d. duty factor - ANSWER-✅d. duty factor; the maximum value is 1, the minimum is 0
The unit of duty factor is:
a. Hz
b. mm
c. ms
d. unitless - ANSWER-✅d. unitless
Quality Factor= Fundamental frequency/ bandwidth - ANSWER-✅This allows doses
of different types of radiation to be compared for their biological effects.
Clinical imaging transducers are: - ANSWER-✅wide bandwidth; low q factor
Power/area= - ANSWER-✅Intensity
Increasing wavelength will ___________ frequency.
a. increase
b. decrease
c. not change
d. cannot be predicted. - ANSWER-✅b. decrease
All of the following directly affect frame rate except:
a. depth of penetration
b. field of view
c. number of focuses
d. line density
e. beam width - ANSWER-✅e. beam width
2025|(200+)Brand new Exam Questions And
Correct Answers All Graded A+|Guaranteed
Success|Latest Update 2024-2025
Which gain will increase the risk of bioeffects?
a. transmit
b. receive
c. gain
d. overall gain - ANSWER-✅a. transmit
Which of the following is considered the memory of an ultrasound instrument?
a. pulser
b. transducer
c. receiver
d. beam former
e. digital scan converter
f. display monitor - ANSWER-✅e. digital scan converter
Spectral broadening suggest:
a. laminar flow
b. turbulent flow
c. flow away from the transducer
d. flow towards the transducer - ANSWER-✅b. turbulent flow
With pulse wave Doppler axial resolution: - ANSWER-✅degrades
What color is usually use in color flow Doppler variance map to indicate turbulent
flow? - ANSWER-✅green
Doppler high pass filter eliminates: - ANSWER-✅high amplitude signals; low velocity
flow
The Doppler wall filter is considered a: - ANSWER-✅high pass filter
The Nyquist Limit is equal to:
a. propagation speed x frequency
b. propagation speed/ wavelength
c. PRF/2
,d. 4xV^2 - ANSWER-✅c. PRF/2
Multiple echoes, equally spaced originating from a gas bubble is called:
a. comet tail
b. ring down
c. slice thickness artifact
d. multipath - ANSWER-✅b. ring down
An increase in red blood cell velocity will_____ the Doppler Shift:
a. increase
b. decrease
c. not change
d. cannot be predicted - ANSWER-✅a. increase
The primary advantage of CW Doppler is:
a. range resolution
b. range discrimination
c. range ambiguity
d. range gating
e. absence of sampling rate - ANSWER-✅e. absence of sampling rate
The range for ultrasound begins:
a. 20 Hz
b. 20,000 Hz
c. 2 MHz
d. 15 MHz - ANSWER-✅b. 20,000 Hz (useful frequency range for clinical imaging is
2MHz-10MHz)
Which instrument control affects the amplitude (dB) of the outgoing signal:
a. gain
b. receiver gain
c. TGC
d. transmit gain
e. overall gain - ANSWER-✅d. transmit gain; amplitude can be affected by the
sonographer
Which of the following is used to convert Doppler shift information into color:
a. high PRF
b. fast Fourier transform
c. autocorrelation
d. time interval histogram - ANSWER-✅c. autocorrelation
b is incorrect because fast Fourier transform is the method used to process
conventional Doppler shift information but is too slow a method for color Doppler
Pulse repetition frequency - ANSWER-✅Number of pulses that an ultrasound
system transmits into the body each second. Hz. Typically 4-15 KHz. PRF and depth
, of a view are inversely related: When system is imaging deeper, the pulse repetition
frequency is lower.
Also the number of pulses created each second
The best way to increase the near field length of an ultrasound beam is to: -
ANSWER-✅increase transducer diameter
The range of frequencies produced by a damped PZT element is called:
a. fundamental frequencies
b. Q Factor
c. near field
d. bandwith - ANSWER-✅d. bandwidth
The percentage of time that the ultrasound instrument is emitting ultrasound is
called:
a. PRF
b. pulse duration
c. pulse repetition period
d. duty factor - ANSWER-✅d. duty factor; the maximum value is 1, the minimum is 0
The unit of duty factor is:
a. Hz
b. mm
c. ms
d. unitless - ANSWER-✅d. unitless
Quality Factor= Fundamental frequency/ bandwidth - ANSWER-✅This allows doses
of different types of radiation to be compared for their biological effects.
Clinical imaging transducers are: - ANSWER-✅wide bandwidth; low q factor
Power/area= - ANSWER-✅Intensity
Increasing wavelength will ___________ frequency.
a. increase
b. decrease
c. not change
d. cannot be predicted. - ANSWER-✅b. decrease
All of the following directly affect frame rate except:
a. depth of penetration
b. field of view
c. number of focuses
d. line density
e. beam width - ANSWER-✅e. beam width
